Home > Products > Electronics & Electricity > Telecommunication & Broadcasting > Other Communication Equipment

DSLAM5016 is a 16ports IP based ADSL2+ Mini DSLAM with splitter built-in. It terminates all the ATM circuits and converts traffic directly to deliver the most popular broadband IP services.

DSLAM5016 offers lower port count DSLAM available in the market place. It provides the least initial investment solution for Service Providers who want to start providing high speed internet access service in a low subscriber density location on existing copper twisted pair telephone lines.

Sino-Telecoms IP DSLAM technology is also backwards compatible with early version of ADSL.DSLAM5016 is compliant with ITU G.992.5, G.992.3, G.992.1, the G.992.5 ADSL2+ technology is an enhanced version of the ADSL technology which provides cross-talk free deployment. The unit features maximum downstream rate up to 24 Mbps and maximum reach distance over 6.5 Km.

With the highly compact (1U height) and temperaturehardened design, simple installation and easy adaptation to local POTS/ISDN splitter requirements, DSLAM5016 is an ideal solution for Triple-play requirements deployed in indoor and outdoor enclosures.

Features

  Supports ANSI T1.413 Issue 2, ITU G.992.5, G.992.3,G.992.1 (G.dmt), ITU-T G.992.2 (G.lite)
  One 10/100 BASE-TX ports for uplink with autonegotiating
  16 ADSL2+ Ports
  Support Annex M
  Support 802.1P, STP
  Support 802.1Q
  Multimode (automatic modulation detection)
  Supports packets transmit and receive statistics report
  Support NAT
  Support DHCP server
  Support DHCP relay
  Support multiple PVC QoS
  Provides optimal rate/reach performance
  Higher rates by limiting reach (up to 24.0 Mbps)
  Longer reach by reducing rate (distance up to 6.5 Km)
  Bandwidth Management control on each port at 32kbps interval.

Network Configuration Modes
  Gateway
  Router
  Bridge

Management
  Web based management
 SNMP-based GUI EMS
  Local RS-232 CLI
  Remote in-band SNMP/TELNET management
  Firmware upgradeable via web, FTP or TFTP

Hardware Configuration
  2 RJ45 for Uplink
  1 TELCO-50 connectors ( including 12pairs phone line) link to PSTN
  1 TELCO-50 connectors ( including 12pairs phone line) link to ADSL2+ users
  1 console  for Local Management

Physical Specification
  Dimensions: 440mm(W) x 325mm(D)in x 44.5mm(H) 
  Weight: 5.5Kg

Input Power
  AC Power Model: 90VAC ~ 260 VAC, 50-60 Hz
  DC Power Model: -40VDC ~ -60 VDC
  Power Consumption: 32 watts

Operation Parameters
  Operating Temperature: 0 to 50°C
  Storage Temperature: -40~+80°C
  Operating Humidity: 5% to 95% non-condensing
  Operating Altitude: -200ft.to +15,000ft
  Reliability: MTBF 140,000 hrs minimum