Home > Products > Industrial Supplies > Packaging Related Machine

Feeding unit

1: Adopt vacuum adsorption, automatically pick the paper up and feed it.

2: Elastic rubber roller fed without destroying the corrugated board.

3: Set dusting device can eliminate (the suction) the dust on the surface of the cardboard.

4: Continuous or skip feeding function.

5: Electric rear box.

6: With the side board to leave the air pump.

Printing unit

1: 180 and 220 meshes standard metal aniloxroller can be selected.

2: The electric phase adjustment and readouted by the dial.

3: Detachment positioning device to ensure that each printing plate keep the same position while detachment and combination.

4: Motorized detachment and combination device, pneumatic locking.  

5: Printing roller adopts sticky and hanging forme.

6: Pneumatic the off version idling, motorized wash ink out.

7: Horizontal electric adjustment for printing roller.

Slotting unit

1: 3 parts of slottingand 1 part for corner cut.

2: 2 parts for select paper, and has 4 parts for press the side ( of carton).

3: The electric phase adjustment and readouted by the dial.

4: Detachment positioning device to ensure that each printing plate keep the same position while detachment and combination.

5: Motorized detachment device, pneumatic locking.

6: Electric linkage adjustment for slotting part.

7: The slotting wheel cutter and pressure roller can adjustment at the same time.

8: LCD monitor installed in the tool apron.

Die-Cutting unit

1: Axial displacement

2: Sharp knife easily cut cardboard

3: Some bearings imported from Japan.

4: With a waste materials device.

Stack department

1: Automatic counting, ‘take paper arm’ pneumatic lift; auto lifting frame according to the amount of the paper; speed regulating motorcontrol, automatic counting.

The whole machine:

1: The above feed part, printing part and slotting part oiling system are used spray type automatic lubrication.

2: The level 1 and 2 reset device. Touch human-machine interface, PLCA control, Automatic phase, Electric high-speed motor.

3: Rank according to four-color printing die cutting slot.

Technical parameters：