Model: | ISB800-3 |
---|---|
Brand: | JASU |
Origin: | Made In China |
Category: | Industrial Supplies / Rubber & Plastics Machine |
Label: | injection blow , molding , machine |
Price: |
US $57000
/ pc
|
Min. Order: | 1 pc |
Last Online:23 Jan, 2014 |
Machine Characteristics
JASU ISB800-3 is a one stage injection blow molding machine (not from performs) for PET, PC and PP containers. The machine is capable of accepting 6 cavities.
Fully automatic, single step, injection stretch blow moulding machines to produce containers from 0.3 litres up to 1 litres. Widely used for manufacturing bottles for pharmaceutical, healthcare, food, beverages, cosmetics and other applications.
A horizontal three station indexing head contains injection, blowing and outfeed stations which operate simultaneously in a fully automatic cycle. Highly efficient with low energy comsuption.Suitable for use with a wide range of thermoplastic materials, including PET, PP and PC.
All machines are built to ISO9001 standards and CE certified
*The machine provides fast molding performance without scrap or connecting lines on bottle bottom or side.
*Maximum uniformity of bottle weight, thickness and volume.
*Bottle body, neck and mouth can be varied to meet specific requirements.
*Extremely smooth and elegant bottle surface is ideal for high-quality and high-price packaging.
*This high production machine is capable of producing bottles in multiple cavities at one time.
*Suitable for various materials, such as PET, PE, PP, PS, PC, PETG, PMMA, etc., for
Typical Products for Injection Blow Molding
JARS – These are made in PP, HDPE, PS, MIPS, SAN etc. Jars are made in a wide variety of materials. The process advantage is that no secondary trimming (scrap) is required when making the neck finish. Ovaloid neck (petroleum jelly) jars can be made by injection molding the neck finish.
.........................................................................................................................................................................
ONE PIECE ROLL-ON DEODORANTS in PP and HDPE. Close tolerance of the injection moulded ball seating allows an even application of the deodorant product. Snap-on ball housings are also used on SAN and PET bottles used for clarity.
.........................................................................................................................................................................
DROPPER BOTTLES – Usually produced in virgin LDPE. JASU IBM machines are installed in clean manufacturing environments worldwide. The bottles can be stripped from the core rods whilst still very hot and transported to the clean room in sterile air for packing.
.........................................................................................................................................................................
TABLET and PILL BOTTLES(Phamarcy Bottle) – These are made from PP, HDPE, LDPE and PS. These bottles can be designed with complicated injected neck finishes for Child Resistance or pilfer-proofing. Also the neck finish is excellent for barrier seals against moisture with a plug seal closure, and also very flat for tamper foil application.
.........................................................................................................................................................................
OVALS – CYLINDRICALS AND BOSTON ROUNDS – These bottles are made in HDPE, LDPE, PP. Up to 4 cavity molds from 10-15 second cycles. QUALITY PRODUCTS do not cause problems on decoration, filling or capping lines, and are less liable to bring customer complaint.
.........................................................................................................................................................................
LED Lampshade – PC/PET lamp cover for energy saving light
Injection Blow Molding Machine Parameter | |||||
Item | Unit | Machine Type | |||
IB500-2 | ISB800-3 | ISB800-4 | |||
Injection Part | Screw Diameter | mm | 50 | 40 | 40 |
Screw L/D Ratio | L/D | 23.2 | 23 | 23 | |
Screw Speed | r/min | 0-185 | 0-220 | 0-220 | |
Injection Weight | G | 390 | 195 | 195 | |
Injection Pressure | Kg/cm2 | 1700 | 1504 | 1504 | |
Max. Hydraulic Pressure | Kg/cm | 140 | 140 | 140 | |
Plasticizing Capacity | g/s | 24 | 14 | 14 | |
Injection Rate | g/s | 128 | 140 | 140 | |
Clamping Part | Blow Clamping Force | Kn | 150 | 80 | 80 |
Clamp Tonnage | Kn | 600 | 400 | 400 | |
Wheel Diameter | mm | 800 | 800 | ||
Max. Height of Bottle | mm | 400 | 400 | ||
Open Vertical Mode Trip | mm | 430 | 430 | 430 | |
Others | Max. Pump Pressure | Mpa | 16 | 16 | 16 |
Motor Oil | Kw | 18.5 | 18.5 | 18.5 | |
Electric Power | Kw | 16 | 13 | 13 | |
Tank Volume | L | 400 | 400 | 400 | |
Dimension of Machine | m | 4.1x1.45x3.1 | 3.8x1.45x3.0 | 3.8x1.45x3.0 | |
Machine Weight | Ton | 5 | 5 | 5 |
Payment Terms: | TT/LC |
---|---|