Home > Products > Electronics & Electricity > Telecommunication & Broadcasting > Network Communications Equipment

EDUP EP-B3509 Bluetooth Music Receiver/Speaker/ Conference System

Model: EP-B3509

The Bluetooth music receiver is designed to receive mobile phones or transmitters that feature Bluetooth wireless technology. The music receiver can be used in office meeting and car calling hands-free system. To enjoy the music and calling solution .Using only one button, you can easily switch between phone and music, even playing internet broadcast.

Technical Date

1. Bluetooth V3.0+EDR, the furthest distance is 10m
2. Bluetooth hands –free
3. Bluetooth stereo audio profile:AD2P
4. Frequency:;2.4GHz
5. Certificate: CE,FCC,AND BQB
6. Sleep mode for power conservation
7. Power supply: chargers via mini-USB cable
8. Operation time: up to 8 hours

Contents of package

1. Bluetooth music receiver
2. USB cable
3. USB car power adapter
4. User Manual

A: Charging

1. Using the supplier USB cable, connect the small end to the mini-USB input of the music receiver
2. Connect the other end to the USB input of your PC, laptop or USB power converter,

The music receiver’s LED light will glow red during charging.

1. When charging is finished, the red LED will turn off. A full charge will provide up to 8 hours of play time.

B: Pairing the music receiver

1. To enter pairing mode, press and hold the on/off button(button1)for 5seconds until both red and blue LEDS flash.
2. Search for the music receiver on your mobile phone or compatible transmitter.
3. The devices should now recognize each other and pair. The LED on the music receiver will slowly flash blue after successful paring.
4. To complete pairing some devices require a pass key or code, please enter ‘0000”
5. Once successfully paired, the devices can be powered off. To re-connect simply power them both on, no need to pair again.

C: If you had already matched before

Press and hold the on/off button (button1) for 3 seconds until the blue LED light begins flashing. To turn off, press and hold the on/off button (button10for 5 seconds. The red LED will light up, and then turn off.

Note: Read the user guide of your transmitter or mobile phone to find out how to turn on/off Bluetooth wireless technology.

Note: if you want to use hand-free to connect with other transmitter, you must re-connect from step one. After paired with new transmitter, the transmitter before won’t pair with this music receiver, you only can connect with one device at the same time.

D: Playing Music

1. Make sure the transmitter 9mobile phone, PC, PAD OR compatible source is turned on and paired with the music receiver and that the devices are no more than 10m apart.
2. The blue LED on the music receiver will flash slowly, indicating a connection
3. When you playing music, music will transfer to hand-free system via Bluetooth wireless transmission.
4. Left (button2) right (button3) press and hold can adjust the volum ,short press can change the playing music

Note: If you cannot hear the music

a)     Make sure your stereo system is connected

b)     Check and make sure the volume is not turned down or muted.

Hands-free:

1. Default your phone using Bluetooth microphone, telephone access to the speakerphone comes MIC.
2. Phone calls ,you can press the key (button1) to open to answer a voice call
3. After the completion of the call, the phone cuts into the state before automatically.
4. Disconnect after one minute, the Bluetooth device will shut down.
5. E: Visual Indicate 

1. F: Troubleshooting
2.  
3. The connection between the music receiver and transmitter is established once the pairing process is complete; the connection can break for the following reasons:
4. a :The distance between the devices is greater than 33’(10m),or there are obstacles (e. g: walls, furniture, etc.) between them.
5. b : One or both of the devices has been turned off or must be charged.
6. C : Connection has not been made within a specific time and the devices in sleep mode or powered off. Turn on/off both devices to re-connect please try the following:
7. 1. Power cycle (on/off) the music receiver and transmitter.
8. 2. Power the cycle and repeat pairing process for both devices.
9. 3. Recharge both devices.
10.  
11. G: FCC Information
12.  
13. Tested to comply with FCC standards for home or office use, This device complies with part 15of the FCC rules: Operation is subjects to the following two conditions (1) this device may not cause harmful interference, and (2) this device must accept any interference received; Including interference that may affect the normal operation of device.
14. Changes or modifications to this unit are expressly forbidden. Any attempts to disassemble will void the warranty .Any attempts to modify could violate the FCC/CE conditions .