Product Description
INTRODUCTION
- Drawer type Magnetic Separator is composed of cabinet and single layer or multilayer magnetic bars which can be draw out. If you hope have good performance of separate the irons, the best choice is multilayer, because multilayer can decrease the flow speed of material and also crack the block of material and can also avoid blind area which magnet not strong.
- Drawer type Magnetic Separator is popular in the material manufacturers. It has widely application and easy to clean. It can also use different size and connect mode to integrate to production line, pipe type or chute type all can use it. We can design magnetic separator according to customer’s special requirement, so they can be easy to install to their current production line.
- Depend on different separate irons requirement, different temperature and economic requirement, we can use different material to produce magnetic separator, such as NdFeB, samarium cobalt, ferrite, AlNiCo magnetic bars. The stronger magnetic material can separate the smaller irons, so it can also ensure much better material purity and protect machine’s safety in next step.
- Drawer type Magnetic Separator use all kinds of door to avoid powder leak out, such as door with sealing washer, door with fastener; It can ensure good working environment. Operator is easy to open and close door and also easy to clean out the irons
- If customer need monitor the Separator working Status inside, we designed organic glass door or cabinet, operator will be easy to see how much irons absorbed by magnetic bars and can clean it at any time. Some design is simple draw out the magnetic bar and irons absorbed on stainless steel pipe without magnetic will fall automatic.
APPLICATION
- Magnetic Bar Frame is mainly used to absorb irons mixed in powder, liquid or sauce
- Widely used in Ceramic, electric power, mining, plastic, chemical, rubber, pharmaceutical, food, environmental protection, electronics, metallurgy, pigment industries.
SPECIFICATION
Model No.
|
MS-200
|
Qty of Layer and Magnetic Bars
|
5 Layers, 27pcs of Magnetic Bars
|
Magnetic Field Intensity on Surface
|
12000GS
|
Magnetic Bar Diameter
|
25mm
|
Pipe Diameter for bars
|
27mm/32mm
|
Material
|
Material of cover of magnetic bar is stainless steel 304, other parts of materials which contact with product is stainless steel 304 or stainless steel 316L
|
Temperature
|
≤100℃
|
Connection Mode
|
DN200 fast chuck or flange connection
|
Product Image
Send Inquiry to this Member
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,