| Pipe elbows are mainly used for connecting two pipes or tubes, allowing a change of direction. We can provide short radius elbows and long radius elbows. Usually, pipe elbows are made of carbon steels, alloy steels, stainless steel, and more.
Size
Seamless elbow:1/2"～24" DN15～DN600
Welded Elbow: 1/2"～100" DN15～DN2500
Wall Thickness
sch10, sch20, sch30, std, sch40, sch60, xs, sch80, sch100,
sch120, sch140, sch160, xxs, std,sch5s, sch20s, sch40s, sch80s
Materials
Carbon steel: ASTM/ASME A234 WPB、WPC
Alloy steel: ASTM/ASME A234 WP 1-WP 12-WP 11-WP 22-WP 5-WP 91-WP 911
Stainless steel: ASTM/ASME A403 WP 304-304L-304H-304LN-304N
ASTM/ASME A403 WP 316-316L-316H-316LN-316N-316Ti
ASTM/ASME A403 WP 321-321H ASTM/ASME A403 WP 347-347H
Low-temperature steel: ASTM/ASME A402 WPL 3-WPL 6
High performance: ASTM/ASME A860 WPHY 42-46-52-60-65-70
Surface treatment
Transparent oil, rust-proof black oil or hot galvanized.
Major Products
Seamless pipes, Elbow, Reducer, Tee, Pipe Cap, Flange and etc...
Special design is available for all the production process, according to consumer’s need strictly.
Specifications for Pipe Elbow
| |
Production range |
| Outside diameter |
1/2"～100"
DN10～DN2500
|
| Wall thickness |
2mm~120mm |
| Bending radius |
R=1D~10D |
| Product angle |
0°~180°  |
|
