Product Description
Item Specification
Numbr of Layer 1-38Layers
Material FR-4,FR2.Taconic,Rogers, CEM-1 CEM-3,ceramic , crockery
Metal-backed Laminate
Remarks High Tg CCL Is Availabe(Tg>=170ºC)
Finish Board Thickness 0.2mm-6.00 mm(8mil-126mil)
Minimun Core Thickness 0.075mm(3mil)
Copper Thickness 1/2 oz min;12 oz max
Min.Trace Width & Line Spacing 0.075mm/0.1mm(3mil/4mil)
Min.Hole Diameter for CNC Driling 0.1mm(4mil)
Min.Hole Diameter for punching 0.9mm(35mil)
Biggest panel size 610mm*508mm
Hole Positon +/-0.075mm(3mil) CNC Driling
Conductor Width(W) +/-0.05mm(2mil)or
+/-20% of original artwork
Hole Diameter(H) PTH L:+/-0.075mm(3mil)
Non-PTH L:+/-0.05mm(2mil)
Outline Tolerance +/-0.125mm(5mil) CNC Routing
+/-0.15mm(6mil) by Punching
Warp & Twist 0.70%
Insulation Resistance 10Kohm-20Mohm
Conductivity <50ohm
Test Voltage 10-300V
Panel Size 110×100mm(min)
660×600mm(max)
Layer-layer misregistration 4 layers:0.15mm(6mil)max
6 layers:0.25mm(10mil)max
Min.spacing between hole edge to circuity pqttern of an inner layer 0.25mm(10mil)
Min.spacing between board oulineto circuitry pattern of an inner layer 0.25mm(10mil)
Board thickness tolerance 4 layers:+/-0.13mm(5mil)
6 layers:+/-0.15mm(6mil)
Impedance Control +/-10%
Different Impendance +-/10%
Send Inquiry to this Member
Related Products of this Company
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,