Home > Products > Industrial Supplies > Other Industrial Supplies

~~FRP MOLDED GRATING PANEL
The one piece interwoven mesh construction of molded fiberglass grating produces a product with optimal corrosion resistance and bi-directional strength. Since the fiberglass grating is "cast" in one piece, there is no mechanical joint between bearing bars, unlike pultruded grating where the glued joints can give way in heavy continuous traffic or after prolonged service.

The high percentage of resin (65%) in molded fiberglass grating offers superior corrosion resistance and optimal impact resistance. Molded fiberglass gratings with a square mesh pattern offer increased load capacity and panel utilization due to its be-directional trait.

Numerous cut-outs for piping, valve access, and column penetrations can be made without the need for additional structural framing. Being of one-piece construction, the fiberglass grating performs as a plate, distributing loads throughout the fiberglass grating section and around cut-outs. Cutting access holes in the molded fiberglass grating does not weaken the panel and does not generally require additional or costly supports (unlike pultruded fiberglass grating that will require additional supports at cutouts).

Specifications
Thickness 25mm
25mm thick 38x38mm square mesh, bearing bars run both direction
Bear bar thickness (Top/Bottom): 6.4/5.0
Bear bar center: 38
Open Area: 68%
Approximate Weight: 12.30 kgs/m2
Panel size available: 1524 x 4000, 1220 x 4000, 1220 x 3660, 1220 x 2440, 915 x 3050

Thickness 38mm
38mm thick 38x38mm square mesh, bearing bars run both direction
Bear bar thickness (Top/Bottom): 7.0/5.0
Bear bar center: 38
Open Area: 68%
Approximate Weight: 19.50 kgs/m2
Panel size available: 1524 x 4000, 1524 x 3050, 1220 x 4000, 1220 x 3660, 1220 x 2440,
915 x 3050

Thickness 50mm
50mm thick 50x50mm square mesh, bearing bars run both direction
Bear bar thickness (Top/Bottom): 7.0/5.0
Bear bar center: 50
Open Area:78%
Approximate Weight: 20.80 kgs/m2
Panel size available: 1524 x 4000, 1220 x 3660, 1800 x 4000, 1220 x 2440, 915 x 3050

INTECH's FRP products are tested to comply with major international standards such as ASTM, BS, NEMA, ABS and UL.
Customers include TNB, ABB, IWK, PETRONAS, Shell, Exxon-Mobil, Chevron, Keppel Shipyard and Resort World Sentosa.