Home > Products > Consumer Electronics & Lighting > Lighting > Lighting Fixtures

Interior commercial Led Lighting heat sink, Architectural Led Light Housing.

Aluminum profile.                            
use 24*1W high power LEDs.    or 80*0.5W SMD LEDs.      Silver anodize finish.    700g.          
L=994mm  standard.   W=35mm      H=32.5mm    

PC cover .                                               
Diffused / Frosted PC cover.  about 85% light  transmittance.  90g.
L=994mm  standard  T=1.2mm      W=35mm    H=19mm                    
                                                    
Long end cap.
 Aliuinium 1050.   Silver anodize finish.  12g / Piece.       
T=3mm   W=35mm      H=48mm     ( 2 Pcs for two ends.)  
             
Short end cap.                                                        
Aliuinium 1050.   Silver anodize finish.    7g / Piece.  
T=3mm    W=35mm       H=32.5mm    ( 2 Pcs for two ends.)                 
                
Pendant System.                                      
1-1.5 M lenght steel rope, Other main parts are copper material with nickle plating.                           
Can stand 20KG + weight. 27g / set.       
Locker + Steel rope +  clip fixture + Wall plug  + Screw.                               
( 2 Sets for 2 ends.)       

Peadant clip.                                                 
2 Pcs for each set housing.              8g /piece.  
L=20mm       W=34.5mm      T=6.8mm

Connect bridge.                                       
Alternative parts.    Be used to connect two long pieces aluminum profiels.     16g / Piece.
L=40mm       W=34.5mm     T=6.8mm

 24W PCB .                                                     
Alternative parts.        Thermal Conductivity: 1.2        24W in series link.       72g.
985x24x12mm       

Screws
4 x M3*12 self tapping.      2-5 x M3 * 4.