Home > Products > Industrial Supplies > Machinery > Convey Belt

grooved conveyor roller
1.It does not make grooves on the tube, but moving the “O-ring” wheel to the end of the roller, make it separate between drive space and convoy space, avoid the interference between “O-ring” and conveying goods, also avoid the oil from the surface of goods polluting the “O-ring”.
2.Because it is not grooving on the tube, the tube will not have any distortion, and so the roller will run more smoothly.
3.The load capacity of roller depend on the driving power of “O-ring” and the transmission structure(line shaft drive is higher than hook-ups), reference data is normally 300N.
4.Precision ball bearing and inner/outer bushes form the bearing unit which is very important, it is not only for good looking but further more for the roller running more smoothly and quiet.
5.The end cap of roller resists dust and water splash well in operation environment.
6.Suitable in high speed application. Speed could vary according to diameter and length of roller, Max. Speed up to 120m/min.

Grooved conveyor roller, standard precision bearing, stable turning, suit for most of roller conveyor.
Applicable conveyor type: roller conveyor
Applicable situation: Indoor transportation
Tube DIA: 25-89mm
Tube Material: carbon steel
Wall thickness: 1.5-3mm
Shaft Dia: 12-20mm
Mounting way: spring loaded, female thread, flat milling.Other mounting way is available.