| Model: | SWA232AP |
|---|---|
| Brand: | JZS |
| Origin: | Made In China |
| Category: | Electronics & Electricity / Other Electrical & Electronic |
| Label: | motor driver , stepper motor , motor actuator |
| Price: |
US $120
/ set
|
| Min. Order: | 1 set |
| Last Online:02 Feb, 2015 |
High Speed Large Nema 34 Stepper Motor Driver
Chongqing Jinzaisheng Mechanical Electrical Co., Ltd. is specialized in developing, manufacturing and marketing of hybrid stepping motors and peripheral products.We have comprehensive products mainly including, hybrid stepping motors in size of 20mm, 28mm, 35mm, 39mm, 42mm, 57mm, 60mm, 86mm, 110mm and 130mm, permanent magnet stepper motors in size of 5mm, 6mm, 10mm, 15mm, 24mm and corresponding drivers.
Product Description
Stepper Motor Driver uses the latest special motor control DSP chip technology of vector loop, thus completely overcome step-lose problem of the open-loop stepper motor, but also can significantly improve the high speed performance, reduce motor heating and motor vibration, so that power consumption of the machine reduces, processing speed and precision rises. In addition, in the situation that motor continuous overload, the output alarm signal is effective which makes the stepper driver has the same and reliability of AC servo system .the traditional 86 series and 110 series stepper motor is fully compatible with JZSA232AP .the cost is less 50% than the traditional AC servo system.
Features of Stepper Motor Driver
The Usage of Stepper Motor Driver
Stepper Motor Driver is widely used in all kind of small sized and medium sized automation equipment and instruments, such as marking machine, medical equipment, engraving machine, cutting machine, laser typesetting, plotters, CNC Machine, automatic packing units and so on. Low noise and small vibration, it is highly thought by customers.
The Certificates We Got:
Stepper Motor Driver is with high quality and we have got ISO9001, CE, BV certificates.
Diagnoxis and Treatment
|
Phenomenon |
Possible problem |
Treatment |
|
Stepper motor does not rotate |
LED of power is off |
Check the power |
|
Pulse does not meet the requirements |
Check the voltage, width and value of high and low level. |
|
|
Subdivision is too small |
Change the setting subdivision |
|
|
Current is too small |
Change the current |
|
|
Alarm output |
Reset on power |
|
|
Level of enable signal is low |
Make the level if this signal high or suspend it. |
|
|
Wrong rotate direction |
Wrong terminal of motor |
Exchange any line of the same phase. |
|
Setting of P0-9 is wrong |
Change the setting of P0-9 |
|
|
Inaccurate position |
Bad terminal of pulse signal |
Reconnection |
|
Interference of signal |
Remove the interference |
|
|
Wrong subdivision |
Change the setting of subdivision |
|
|
Current is too small |
Increase the current |
|
|
Stall |
Acceleration time is too short |
Lengthen acceleration time |
|
Torque of motor is too small |
Change the motor of more torque |
|
|
Voltage of power supply or current is too small |
Increase the voltage of power supply or current |
Contact Information
Chongqing Jinzaisheng Mechanical Electrical Co., Ltd.
Ms Seaweed Tan
Tel: +86-23-6815 8730 Fax: +86-23-6815 8730
Mobile: +86-18323008656
Skype: seaweed.tan
E-mail: tbb@jzsdj.com.cn
