Home > Products > Electronics & Electricity > Battery, Storage Battery & Charger

Operation Description

Please make the battery fully charged before use it for the first time, when all the 3 indicator lights are on, it shows the charging is complete

Batterycapacity indicated by 3 indicator lights:

when 3 indicator lights on,battery capacity: 67—100%

when 2 indicator lights on,battery capacity: 33—67%

when 1 indicator light on,battery capacity: 10—33%

when 1 indicator light flash,battery capacity<10%,please charge the system in time.

when 3 indicator lights flash at the same time,it shows the battery is already fully discharged,the system output is automatically cut off, stop providing lighting and mobile phone charged. Please charge the system immediately

Provide lighting

Plug the bulb cable into the socket which marked

The system allocates high capacity battery, lighting time when fully charged please see the chart as below.

The system allocates high light bulbs with 100lm above, amount to the luminance of 25W filament lamp.

Warning: THE bulbs is super bright led bulbs, PLEASE AVOID looking in it when lighting.

System charged

Charge the system using solar panel, can get through the below steps:

1.  Place the solar panel towards to the sun where can receive the strongest possible sunlight

2.  Plug the panel cable into the socket which marked, when all of the 3 indicator lights are on, that means fully charged

Charged by solar one day(from 9:00am to 5:00pm),lighting time as below:

In order to get higher charge efficiency, may use the below methods:

1. Place the solar panel towards to the sun, avoid covering by shadow

2. Wipe the panel surface using the wet cloth regularly, avoid resisting the sunlight by dust or blot.

3. Place the system to where shady and cool when charging, so that can increase the charge efficiency

Mobile phone charged

Allocate a connection line and connectors, can charge most of the mobile phone on market.

Operation steps :

1. Plug the USB line into the port which marked

2. Connect the mobile phone through the connector, then charge the mobile phone.

Specification

Battery Maintenance and use skill

The system uses a 6V/4.5Ah lead-acid Maintenance Free rechargeable battery.

In order to keep the longest lifespan

1. Please don’t keep the battery in the over discharge status

2. Please charge the battery at less one time every 3 months, even you don’t use it .

3. When replace battery, only use 6V lead-acid battery, and under conduction by professional person.