| Model: | BEVS 2203 |
|---|---|
| Brand: | BEVS |
| Origin: | Made In China |
| Category: | Electronics & Electricity / Electronic Instrument / Laboratory Instrument |
| Label: | coating , Laboratory testing , Adhesion testing |
| Price: |
US $126
/ set
|
| Min. Order: | 1 set |
| Last Online:26 Aug, 2016 |
Introduction
BEVS2203 Multi-Hatch Gauge is designed and manufactured according to BS3962-6,standard with the convenient and simple feather.It’s wildly used to messure the coating film adhension of plastic and wood.
Feather:
Multi-function in one
Different tests can be complete as below:
Adhesion
Opacity
Wet film thickness
Edge roughness of sharp corner
Cross cutting line
CROSS CUT ADHESION TEST
According ISO 2409. 1, 2 and 3 parallel knife guide slots to produce a grid. Incise the coating just to the substrate. 2 mm grid for layers up to 120μm at soft-surface and layers from 61 to 120μm at hard-surface. 3mm grid for layers of 121 to 250μm. Evaluation according to scale below:
|
Class |
Description |
|
|
0 |
The edges of the cuts are completely smooth; none of the squares of the lattice is detached |
|
|
1 |
Detachment of small flakes of the coating at the intersections of cuts. A cross-cut area not significantly greater than 5% is affected |
|
|
2 |
The coating has flaked along the edges and/or at the intersections of the cuts. A cross-cut area significantly greater than 5%, but not significantly greater than 15%,is affected |
|
|
3 |
The coating has flaked along the edges of the cuts partly or wholly in large ribbons, and or it has flaked partly or wholly on different parts of the squares. A cross-cut area significant greater than 35%,is affect |
|
|
4 |
The coating has flaked along the edges of the cuts in large ribbons and/or same square have detached parity or wholly. A cross-cut area significantly greater than 35%, but not significantly greater than 60%, is affected |
|
|
5 |
Any degree of flaking that cannot even be classified by classified buy classification |
|
| Payment Terms: | Cash in advance |
|---|---|
