Home > Products > Metallurgy , Mining & Energy > Metallurgy & Mining > Metal Mineral

Tungsten alloy plates are refractory metal, which have two-phase composites consisting of W-Ni- Fe or W-Ni- Cu or even W-Ni-Cu-Fe, some tungsten alloys also contain Co、Mo、Cr, etc. Tungsten alloy can be machined into various shapes, such as rods, cubes, blocks, bricks, rings, plates, etc.

Applications for Tungsten Alloy Plate:

1) Sports goods: Professional tungsten alloy plate for darts benchmarking. Fishing sinkers: bullet type, water drop type, pipe type etc.  

2) Counterweights: high-density tungsten alloy plates used as counterweigh in various field, such as counterweight of mechanical hammer; fly hammer; oil drilling platform; darts rod, car counterweight piece etc.

3) Electrode material: it can be made into electrode, welding rod, electrical contact and pneumatic breaker.

4) Electronic sealing piece: due to its favorable high temperature resistance and thermal properties, electronic industry starts to adopt tungsten alloy plate as electronic sealing piece. electrical discharge machining of electrode and resistance welding electrode; high proportion electrical contacts, air circuit breaker in the contacts.

5) It can be machined into X-ray target material, collimator, nuclear container, syringe shielding etc.

Introduction of Tungsten Alloy Plate

1, Width*Length: (2.0-250.0mm)*(2.0-250.0mm)

2, Thickness: 2mm-15mm

3, Density: 15.8-18.75 g/cm3

4, Composition: W content: 85-99%, W-Ni-Fe, W-Ni-Cu

5, Surface: Sintering surface, Forged surface, Ground surface

Tungsten alloy plates are produced by good processing property billets and special cold and hot rolling technology; they can be used to make tungsten target, tungsten heat elements, tungsten radiation shields and tungsten channels for electronics, lightening, electro-vacuum industries.

Tungsten alloy plates play very important role in manufacturing of collimator for nuclear medicine, nuclear research, geological prospecting and security inspection. These materials provide reliable protection against X-rays and gamma radiation.

The thickness of the tungsten alloy plate is as follows:

Foil - a thickness of less than 0.005 in. (0.13 mm).

Plate - thickness greater than or equal to 0.188 inches (4.75 mm).

Sheet - thickness less than or equal to 0.187 inches (4.75 mm) or greater than or equal to 0.005 inches (0.13 mm)