Home > Products > Electronics & Electricity > Electronic Instrument > Analysis Instrument

TES-593 EMF Meter Triaxial Data Logger

Features:

• 10 MHz to 8.0 GHz frequency range.
• For isotropic measurements of electromagnetic fields.
• Non-directional (isotropic ) measurement with three-channel measurement probe.
• High dynamic range due to three-channel digital results processing.
• Configurable alarm threshold and memory function.
• Easy to use
• High frequency (RF) electromagnetic wave field strength measurement.
• Mobil phone base station antenna radiation power density measurement.
• Wireless communication applications (CW , TDMA , GSM , DECT).
• Wireless LAN (Wi-Fi) detection, installation.
• Spy camera, wireless bug finder.
• Cellular/Cordless phone radiation safety level.
• Microwave oven leakage detection.
• Personal living environment EMF safety.
• RF power measurement for transmitters.

  Specification:

  Sensor type	Electric field (E)
  Frequency range	10MHz to 8.0 GHz
  Directional characteristic	Isotropic, 3-dimensional
  Measurement range (CW signal>50MHz)	38mV/m to 11V/m
  Absolute error(1V/m and 50MHz)	+/-1.0dB
  Frequency response (taking into account typ. CAL factor)	+/-1.0dB (50MHz to 1.9 GHz) , +/-2.4dB(1.9GHz to 35GHz)
  Isotropy deviation	Type. +/-1.0dB f>50 MHz
  Overload limit	4.2W/m2 (40 V/m)
  Temperature response(0 to 50 )	+/-1.5dB
  Note	Unless otherwise stated, all specifications hold under the following assumptions: Sinusoidal signals; device in far-field of a source; probe head pointing toward source; ambient temperature +23 +/-3 ; relative air humidity 25% to 75%.

   

  Measurement method	Digital , triaxial measurement
  Directional characteristic	Isotropic, triaxial
  Measurement range selection	One continuous range
  Display resolution	0.1mV/m, 0.1 A/m, 0.1 W/m2;, 0.001 W/cm2;
  Setting time	Typically 1s ( 0 to 90% of meas. value)
  Display refresh rate	Typically 400mS
  Display type	LCD 4 digit
  Audible alarm	Buzzer
  Measurement units	mV/m , V/m , A/m , mA/m , W/m2; , mW/m2; , W/cm2;
  Measurement display value	Instantaneous measured value, maximum value or average value since power-on.
  Measurement average time (in per-set steps)	4s to 15 minutes
  Measurement alarm function	Adjustable threshold with ON/OFF
  Measurement calibration factor CAL	Adjustable
  Manual data memory and read storage	99 sets ( only recall by meter )
  Battery	9V
  Battery life	>15 hours
  Accessory	9V battery, carrying case & manual

Edited by Johnny