| Model: | H578941678905 |
|---|---|
| Brand: | hongtech |
| Origin: | Made In China |
| Category: | Metallurgy , Mining & Energy / Metallurgy & Mining / Non-ferrous Metal |
| Label: | titanium bars , titanium rods , titanium bar price |
| Price: |
US $18
/ kg
|
| Min. Order: | 1 kg |
| Last Online:14 Jan, 2015 |
Titanium Bars ,Medical Titanium Bars,Titanium Rods
| Products Name: | Titanium bar/rod | |||
| Material: | GR1,GR2,GR3,GR4,Gr5, Gr6, Gr7, Gr9, Gr11, Gr12, Gr23 etc | |||
| Size: | Dia. 4~350mm*L 300~6000mm or customized size. | |||
| Standards | ASTM B348, ASME SB348, ASTM F67, ASTM F136, AMS 4928 | |||
| State: | M/Y/R | |||
|
Processing: |
Hot forging, Hot rolling, Hot extrusion, Cold rolling, Cold drawing | |||
| Surface: | Bright, Polished, Pickling, Acid cleaning | |||
| Technic Test: | Tensile test, Visual, Ultrasonic, Macrostructure, Microstructure | |||
| Application: | Industrial, Chemical, Medical | |||
Table 1. The composition of Titanium grades.
| Grade | Chemical Composition (%) | ||||||||||||||||||
| Main Content | Others( ≤ ) | ||||||||||||||||||
| Ti | Al | Sn | Mo | V | Cr | Mn | Zr | Pd | Ni | Cu | Nb | Si | B | Fe | C | N | H | O | |
| Gr5 | Balance |
5.5~ 6.75 |
- | - |
3.5~ 4.5 |
- | - | - | - | - | - | - | - | - | 0.30 | 0.08 | 0.05 | 0.015 |
0.20 |
| Gr7 | Balance | - | - | - | - | - | - | - |
0.12~ 0.25 |
- | - | - | - | - | 0.30 | 0.08 | 0.03 | 0.015 |
0.25 |
| Gr9 | Balance |
2.0~ 3.5 |
- | - |
1.5~ 3.0 |
- | - | - | - | - | - | - | - | - | 0.25 | 0.08 | 0.05 | 0.015 |
0.12 |
| Gr12 | Balance |
- |
- |
0.2~ 0.4 |
- |
0.6~ 0.9 |
- | - | - | - | - | - | - | - | 0.30 | 0.08 | 0.03 | 0.015 |
0.25 |
Table 2. Typical mechanical properties for Titanium bar.
| Grade | Tensile Strength | Yield Strength |
Elongation (%) |
Reduction of area(%) | ||
| MPa | Ksi | MPa | Ksi | |||
| Gr5 | 895 | 130 | 825 | 120 | 10 | 25 |
| Gr7 | 370 | 50 | 250 | 40 | 20 | 25 |
| Gr9 | 620 | 90 | 438 | 70 | 15 | 25 |
| Gr12 | 438 | 70 | 345 | 50 | 18 | 25 |
Table 3. Allowable deviation of Titanium bar.
| Grade | Diameter(mm) | Allowable Deviation(mm) | Bending(mm/m) ≤ | ||||
|
Hot Forging |
Hot Extrusion |
Hot Rolling |
Cold Rolling /drawing |
Hot State | Cold & Polished | ||
|
Gr5 Gr7 Gr9 Gr11 Gr12
|
4-10 | ±1.0 |
+0.8/-0.7 |
+0.6/-0.5 |
±0.3 | 6 | 4 |
|
10-20 |
±1.5 |
+1.5/-1.0 |
+0.7/-0.5 |
±0.4 | |||
| 20-30 | ±2.0 | ±2.0 |
+1.2/-0.5 |
±0.5 | |||
| 30-50 | ±2.5 | ±2.5 |
+1.5/-1.0 |
±0.6 | |||
| 50-80 | ±3.0 | ±2.5 |
+2.0/-1.0 |
±0.8 | 10 | 5 | |
| 80-100 | ±3.5 | ---- |
+2.2/-1.2 |
±1.1 | |||
| 100-120 | ±5.0 | ---- | ---- | ±1.3 | |||
| 120-160 | ±5.5 | ---- | ---- | ±1.8 | |||
| 160-350 | ±6.5 | ---- | ---- | ±2.0 | |||
Packaging & Shipping
