| Model: | BFN-HFG9 |
|---|---|
| Brand: | BFN |
| Origin: | Made In China |
| Category: | Security & Protection / Anti-Stati |
| Label: | Ionzing air gun , Antistatic gun , Air blower gun |
| Price: |
US $186
/ pc
|
| Min. Order: | 1 pc |
| Last Online:12 Jan, 2015 |
BFN-HFG9 HF AC Ionizing Air Gun
BFN-HFG9 IONIZING AIR GUN, is a hand static, control device, safe and friendly handling, used to eliminate the dusts and charges in a certain area. Applied in clean area like precision electronic production, electronic device assembly site, biological & pharmacy manufacture area.
Notice: Carefully read this manual before equipping and using
Safety:
1. Unsuitable to use this ionizing air gun under the flammable and explodable environment.
2. Keep out the humidity, causticity, flammable and dirty surroundings, no water allow enter the gun body.
3. The pressed air must be clean and dry.
4. Cut the power supply before you do cleaning and maintaining, if clean the air gun with alcohol or other solvent, have to wait until they fully dry than to connect the power and use.
5. Not to open and repair this high voltage device by yourself.
Features & Advantages:
1. Modem industrial design, ergonomical thought-out, friendly handling, bring you high efficiency.
2. ln-build piezoelectric transformer, no high voltage wire reveal, insure the safety use.
3. Perfect decay time and balance, also have failure indicator.
4. Special tungsten alloy ion pin, long lasting and abrasion resisting, easy to clean.
5. Aviation power plug for power supply insure good connection.
6. Convenient optional high effective filter allow to be used in clean circum stance.
Technical Parameter:
|
Power supply: |
DC24V/500mA (AC input:220V/50Hz,110V/60HZ alternatively) |
|
Pressure of air: |
≤0.6MPA |
|
Windpipe connector spec: |
DiameterΦ6mm |
|
Available Range: |
100mm~800mm |
|
Balance: |
<±15V |
|
Decay Time: |
≤1.0S |
|
Test condition: |
25°C, rH55%, 30cm to wind outlet, according to EOS/ESD S3.1-2006 |
|
Ozone concentration: |
0.002PPM |
|
Operating condition: |
Temperature 0~50°C , rH20%~80%(without frost) |
|
Color: |
Light grey |
|
Dimension: |
W127mm*198mm*28mm |
|
Cable length: |
2M |
|
Material: |
ABS Fireproofing |
|
Weight: |
250g±5g(Gun body) |
Application:
Clean area like precision electronic production, electronic device assembly site, biological & pharmacy manufacture area.
Using Area:
When use, make the air current of BFN-HFG9 lay over the position that need neutralize the charges or spray the air current at the area that need neutralize the charges, let ionized air fully cover the area to be protected.
The air strength of BFN-HFG9 can be adjusted by the air gun trigger, pulling the trigger more and get more ionized air. The user can adjust the air strength by hand or by additional adjust valve.
The pressed air for BFN-HFG9 must lass than 0.6Mpa, exceed this could reduce the efficiency of BFN-HFG9, or damage it.
Decay time relate to the strength of ionized air current, the more the distance to the air outlet, the long the decay time. S ested distance of BFN-HFG9 using is 100mm~800mm.
Air gun is not continues operating device, s est not to use it continuously.
Caution:
Before use, make sure the pressure of pressed air lass than 0.6Mpa, exceed this could reduce the efficiency of BFN-HFG9, or damage it.
If the red alarm LED lights up, stop use the air gun, check it to know if it work properly, better to send it back to factory.
Aviation power plug must insert and pull out without electricity, or may cause the device failure.
Keep out the humidity, causticity, flammable and dirty surroundings, on water allow enter the gun body.
The pressed air for BFN-HFG9 must be clean and dry.
Operation direction:
Use
Make sure the power supply of BFN-HFG9 is power off, insert the power plug to BFN-HFG9 power jack then connect the pressed air windpipe, point the air gun to the air to be protected, pull the trigger, the green LED(power)of the air gun lights up, ionized air come out, adjust the trigger to control the air strength, now the air gun can be use.
High effective filter connection
BFN-HFG9 air gun can high effective filter to double insure the clean of the ionized air meet the clean room request.
The 2 ends of high effective filter is quick windpipe connector, when applying, connect one end to pressed air, another end connect to BFN-HFG9 air juncture.
Caution: High effective filter have single way air through request, the connection of the air-out must follow the direction.
