Home > Products > Toys > Dolls

~Abrasive material silicon carbide

1,High purity,SIC:99%min;

2,European standards (FEPA) and Japanese Standards (JIS)

Silicon Carbide Silicon carbide (SiC), also known as carborundum, is a compound of silicon and carbon with chemical formula SiC. It occurs in nature as the extremely rare mineral moissanite. Silicon carbide powder has been mass-produced since 1893 for use as an abrasive. Grains of silicon carbide can be bonded together by sintering to form very hard ceramics which are widely used in applications requiring high endurance, such as car brakes, car clutches and ceramic plates in bulletproof vests. Electronic applications of silicon carbide as light emitting diodes and detectors in early radios were first demonstrated around 1907, and nowadays SiC is widely used in high-temperature/high-voltage semiconductor electronics. Large single crystals of silicon carbide can be grown by the Lely method; they can be cut into gems known as "synthetic moissanite". Silicon carbide with high surface area can be produced from SiO2 contained in plant material.

1Black silicon carbide particle sand

Black silicon carbide is made through the crushing, grinding acid-base wash, washing, drying, screening and other techniques of natural blocks, our standardized products can meet the different needs of customers.

The European standard: F6, F8, F10, F12, F16, F18, F20, F22, F24, F30, F36, F40, F46, F54, F60, F70, F80, F90, F100, F120, F150, F180, F220, F240.

2Black silicon carbide powder

The applications of black silicon carbide powder are increasing wider and wider an there is a further demand for black silicon carbide powder. Our company has used dry, wet, dry and wet combining method to produce the black silicon carbide powder to apply to the different needs of different products. Products are mainly used in the manufacture of refractory products, ceramic foam industry, solar silicon panels cut, crystal cut grinding, automotive original equipment manufacture, special coatings, plastics modification, environmentally friendly desulfurization power supply industries.

Models of Chinese and European standard classification:

China Standard: W63, W50, W40, W28, W20, W14, W10, W7, W5, W3.5, W2.5, W1.5

European Standard: F280, F320, F400, F500, F600, F800,F1000, F1200, F1500, F1800

~Abrasive material silicon carbide

1,High purity,SIC:99%min;

2,European standards (FEPA) and Japanese Standards (JIS)

Silicon Carbide Silicon carbide (SiC), also known as carborundum, is a compound of silicon and carbon with chemical formula SiC. It occurs in nature as the extremely rare mineral moissanite. Silicon carbide powder has been mass-produced since 1893 for use as an abrasive. Grains of silicon carbide can be bonded together by sintering to form very hard ceramics which are widely used in applications requiring high endurance, such as car brakes, car clutches and ceramic plates in bulletproof vests. Electronic applications of silicon carbide as light emitting diodes and detectors in early radios were first demonstrated around 1907, and nowadays SiC is widely used in high-temperature/high-voltage semiconductor electronics. Large single crystals of silicon carbide can be grown by the Lely method; they can be cut into gems known as "synthetic moissanite". Silicon carbide with high surface area can be produced from SiO2 contained in plant material.

1Black silicon carbide particle sand

Black silicon carbide is made through the crushing, grinding acid-base wash, washing, drying, screening and other techniques of natural blocks, our standardized products can meet the different needs of customers.

The European standard: F6, F8, F10, F12, F16, F18, F20, F22, F24, F30, F36, F40, F46, F54, F60, F70, F80, F90, F100, F120, F150, F180, F220, F240.

2Black silicon carbide powder

The applications of black silicon carbide powder are increasing wider and wider an there is a further demand for black silicon carbide powder. Our company has used dry, wet, dry and wet combining method to produce the black silicon carbide powder to apply to the different needs of different products. Products are mainly used in the manufacture of refractory products, ceramic foam industry, solar silicon panels cut, crystal cut grinding, automotive original equipment manufacture, special coatings, plastics modification, environmentally friendly desulfurization power supply industries.

Models of Chinese and European standard classification:

China Standard: W63, W50, W40, W28, W20, W14, W10, W7, W5, W3.5, W2.5, W1.5

European Standard: F280, F320, F400, F500, F600, F800,F1000, F1200, F1500, F1800