Model: | BT81B-13-12BA |
---|---|
Brand: | Babylighting |
Origin: | Made In China |
Category: | Consumer Electronics & Lighting / Lighting / LED Lighting |
Label: | tube light , led tube light , T8 tube |
Price: |
-
|
Min. Order: | - |
Last Online:02 Feb, 2015 |
Dongguan Sinowin Opto-electronic Technology Co., Ltd
BT81B T8 Sensor LED tubes
Features:
◆The infra red sensor will automatically lower the power (to ~30%) in lack or motions after a preset period of time and resume full power Upon detection;
◆High brightness LED package, energy saving 80% More than an energy saving lamp;
◆Good color rendering to enhance visual perception,Non-flickering;
◆Cool light, no UV, no mercury, environmental friendly;
◆IRbody sensor system, fully integrated mode:people come light working, people go the lights stoped working.
◆Elegant design and easy to install;
Applications:Parking lot, Bus stations, railway stations, stairways, corridors, garages, etc.
Specifications:
Model |
BT81B-13-12BA |
|
Size |
1.2M(4FEET) |
|
Lamp holder models |
G13G13 |
|
Rated Voltage |
AC220V/50~60Hz |
|
System Power |
3W(No detection ,Standby,adjustable) |
13W(Upon detection ,100%) |
Color Temperature |
2300-2700K 2800-3200K 3800-4200K 4700-5300K 5700-6500K |
|
Power Factor |
≥0.9 |
|
Luminous Flux |
240-360 lm |
1040-1170 lm |
Efficacy |
80-90 lm/W |
|
Working Environment |
Temperature :-25℃~50℃ Humidity :≤60% |
|
Color Rendering Index |
>70 |
|
LED lifespan |
>30000h |
|
PC Cover |
Clear.Diffused |
|
Material |
Aluminum & PC |
|
Weight |
0.29 Kg |
|
Sensing distance |
2-5 Meters |
products`specifications and data are subject to changeswithout prior notice.
Naming Rules :
For example: BT82B-18-12BA
Stands for : T8LED lighttube ,Type 2 Style B, Power 18W,Length 1.2M, LED packaging form SMD 3014.
Dongguan Sinowin Opto-electronic Technology Co., Ltd
Product description
Lamps adopt the small power LEDs as light sources ,with AC - DC constant current driving power supply. The lamp body adopted aluminum stamping forming technology and anti-glare cover .
Installation steps:
1) Ensure the power is Turned Off before installation;
2) Neither starter nor ballast is required for LED luminaries. Please ensure both of them are disconnected or removed;
3) If inductive ballast was applied, please remove the starter, and remove or bypass the ballast , as shown in (figure 1-4 )
4) If electronic ballast was applied, please remove or bypass the ballast , as shown in (figure 1-4)
5) Connect the L and N wires to the two lamp holders , as shown in the (Figure 1-5)
Cautions