Home > Products > Chemicals > Adhesives & Sealants

Fast Curing Super Bonding Epoxy Adhesive For Hard Materials 1Fast Curing Super Bonding Epoxy Adhesive For Hard Materials 2Fast Curing Super Bonding Epoxy Adhesive For Hard Materials 3Fast Curing Super Bonding Epoxy Adhesive For Hard Materials 4Fast Curing Super Bonding Epoxy Adhesive For Hard Materials 5
  • Fast Curing Super Bonding Epoxy Adhesive For Hard Materials 1
  • Fast Curing Super Bonding Epoxy Adhesive For Hard Materials 2
  • Fast Curing Super Bonding Epoxy Adhesive For Hard Materials 3
  • Fast Curing Super Bonding Epoxy Adhesive For Hard Materials 4
  • Fast Curing Super Bonding Epoxy Adhesive For Hard Materials 5

Fast Curing Super Bonding Epoxy Adhesive For Hard Materials

Model:650AB
Brand:Jinhua
Origin:Made In China
Category:Chemicals / Adhesives & Sealants
Label:epoxy , glue , adhesive
Price: US $9 / kg
Min. Order:10 kg
Inquire Now

Member Information

Detail

Product Description

Epoxy Resin 650AB

Feature

Epoxy resin adhesive 650AB can be cured under normal temperature and low temperature, easy to operate, with super fast curing, high bonding strength, it also can be cured at high temperature.

 

Application

650AB can be widely used for adhesion for hard materials such as metal parts, electronic components, wood parts, etc..

 

Properties before Hardening

Part

650A

650B

Color

Transparent

Transparent

Specific gravity

1.15

1.05

Viscosity (25)

8000-12000CPS

5500~8500CPS

Mixing ratio

 A: B = 100:100(weight ratio)

Hardening conditions

25 ℃×5 min (2 g)

Usable  time

25℃×2min (10g)

 

Operation 

1.Weigh A and B glue according to the given weight ratio into the prepared cleaned container, fully mixed the mixture again the container wall by clockwise, place it along for 3 to 5 minutes, and then it can be used.

2.Take the glue according to the usable time and dosage of mixture to avoid wasting. When the temperature is below 15 ℃, please heat A glue to 30 ℃ first and then mix it to the B glue (A glue will be thicken in low temperature ); The glue must be sealed lid after use to avoid rejection caused by moisture absorption.

3.When the relative humidity is higher than 85%, the surface of the cured mixture will absorb moisture in the air, and form a layer of white mist in the surface, so when the relative humidity is higher than 85%, is not suitable for room temperature curing, s est to use the heat curing.

 

Properties after Hardening

Hardnessshore D

<85

Withstand voltageKV/mm

22

Flexural strengthKg/mm2

27

Volume resistivityOhm3

1x1015

Surface resistanceOhmm2

5X1015

Thermal conductivityW/M.K

0.56

Induced electric loss1KHZ

0.42

Withstand high temperature

140

Moisture absorption %

<0.15

Compressive strengthKg/ mm2

11.4

 

Caution
1,The operating environment should be ventilative and should keep away from fire. Closely sealed after use. 
2Avoid eye contact in case of contact, wash with plenty of water and get medical attention immediately.

3, If contact skin, wrap with clean cloth or paper, and wash it with water and soap.
4, Keep away from children.
5, Please take a trial before application to avoid usage mistake. 
  
Storage And Shelf Life
1, Store at the tempeture of 25°C or cool and dry place.  Avoid from sunlight, high tempeture or hign humidity enviroment. 

2, Use up as soon as possible when opened. It is strictly forbidden to expose to the air for a long time after it is opened to avoid affecting the quality of the products. The shelf life is six months in the room tempeture of 25°C

 

Notice: The above data is typical data measured by the laboratory environment under 

the temperature of 25 ℃, and humidity of 70%. For customers referenconly.

 


Payment Terms:TT

Product Image

Fast Curing Super Bonding Epoxy Adhesive For Hard Materials 1
Img 1
Fast Curing Super Bonding Epoxy Adhesive For Hard Materials 2
Img 2
Fast Curing Super Bonding Epoxy Adhesive For Hard Materials 3
Img 3
Fast Curing Super Bonding Epoxy Adhesive For Hard Materials 4
Img 4
Fast Curing Super Bonding Epoxy Adhesive For Hard Materials 5
Img 5

Send Inquiry to this Member

Shenzhen Jinhua Electronic Materials Co.,Ltd

Building B, Yufeng Industrial Park, Jiangshi Road, Gongming Town, Guangming New District,Shenzhen

Phone:
86-0755-27157799
Fax:
86-0755-27128202
Contact:
Kerry (Oversea sales)
Mobile:
13823546652

Related Products of this Company

This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please click here.

China Suppliers Quick Searching:

Adhesives & Sealants Made In China Products

,  

Adhesives & Sealants China Suppliers and China Manufacturers