| Model: | - |
|---|---|
| Brand: | seayu |
| Origin: | Made In China |
| Category: | Chemicals / Adhesives & Sealants |
| Label: | thread adhesive , anaerobic ahesive |
| Price: |
-
|
| Min. Order: | 10 pc |
| Last Online:09 Feb, 2015 |
S222 is a one-component, low intensity, thixotropic viscosity, anaerobic type screw thread locking and sealing glue. This product in two close coordination between the metal solidification when cut off from the air.
APPLICATION
Mainly for the need to manually remove the thread locking and sealing. Apply the M2 - M8 thread type.
TYPICAL PROPERTIES
| TYPICAL VALUE | TYPICAL RANGE | |
| Chemical Type | Methyl Methacrylate fat | |
| Color | purple | |
| Viscosity (mPa.s@25°C) | 800-1800 | |
| Specific Gravity(@25°C) | 1.05 | 1.00-1.10 |
| Gap Fill(mm) | 0.13 | |
| destroy moment(N*m) | 6 | 4-15 |
| Average remove torque(N*m) | 4 | 4-10 |
| Temperature(°C) | -54-149 | |
| Fixture Time(min@25°C) | 15 | |
| Cured Time(h@25°C) | 24 |
DIRECTION FOR USE
For locking the best effect, the glue should be oil free surface, clean, and make sure the glue is filled with the whole meshing clearance.
For hole, place a few drops of glue liquid coating on threaded parts with hole mesh.
For blind holes, will a few drops of liquid rubber coating thread inside the hole to the bottom.
For sealing on leading to the thread around 360 °C adhesive solution. Keep first lap thread without adhesive solution. Pushes it into the threaded hole. For large screw and hole, adjusting the dosage of the glue solution, and from the thread with a glue solution. Before the assembly strength did not come up to enough, don't touch.
NOTICE
This product is not used for pure oxygen or oxygen-enriched system.Cannot be used for storage of chlorine has strong oxidizing substances.Don't take back the glue, prevent pollution original packaging.This product is used for plastic products.
Workplace should ventilated, or forced ventilation.
Please keep away from children.
This product contains acrylic and methacrylic acid esters.It basically is mixed to the skin, eye has stimulative effect.
If gets to skin, please immediately with soap and water cleaning.
If you touch the eyes carelessly, please use a lot of clean water and call a physical attention.
Please refer to the details of this product MSDS .
PACKAGE
Order code:1210023 50ml/bottle
Order code:1210030 250ml/bottle
STORAGE
Store the product in a clean and dry location in unopened containers at 8-28°C.
Shelf-life:18month
