Model: | AL-100 |
---|---|
Brand: | athenalaser |
Origin: | Made In China |
Category: | Electronics & Electricity / Electronic Instrument / Other Electronic Instrument |
Label: | Elight machine , elight hair removal , Bipolar RF |
Price: |
-
|
Min. Order: | - |
Last Online:21 Mar, 2015 |
Principle
E-Light combines three advanced technologies: Bipolar Radio Frequency + IPL +Skin Contact Cooling. When the three are united in one treatment, wonderful treatment experience and result can be expected. The energy of Radio Frequency can reach the middle and deep layer of the skin and heat up tissue, thus, lower energy is applied during the IPL treatment. IPL energy has been absorbed by pigment, so pigment tissue has been heated enough to be broken down into lots of tiny particle, then they are metabolized through lymphatic system, so effect can be achieved perfectly. Uncomfortable feeling during the IPL treatment will be decreased significantly and better result can be expected. In addition, cooling system involved in E-light can also ease the uncomfortable feeling. The absorbing of the energy of radio frequency is not concerned with melanin. So, the E-Light treatment can get good result on the soft or thin light color hair so as to decrease the risk caused by traditional IPL treatment
Applications
1. Remove unwanted hairs;
2. Remove facial vascular lesions (Telangiectasis);
3. Clean and tighten visible pores;
4. Smooth fine wrinkles;
5. Make skin more flexible;
6. Improve the tone of skin and remove facial blemish;
7. Remove acne;
8. Skin whitening
Advantages
1.Designed according to abundant clinical data worked out by many famous clinical doctors;
2.Advanced technology: IPL+RF, can achieve the best effect.
3.Stainless components gurantee best quality.
4.Separate filters(sapphire) make treatment more professional and accurate.
5.Professional refrigeration system(-5°C-0°C) make treatment more comfortable.
6.Large Colar touch LCD screen make operation more convenient.
7.Metal shell makes machine more stable and luxurious.
8. Super heat removal system make long working time( at least 10 hours per time)
Wavelength: |
530/560/585/640nm~1200nm, 4 filters interchangeable; |
Energy Density: |
50J/cm2; |
Spot Size: |
8mm×40mm; |
Pulse Duration: |
3ms~8ms; |
Repetition Rate: |
0.3Hz; |
Off Time: |
5~50ms; |
Electrical Requirements: |
110V or 220V; |
Cooling Method: |
Closed-loop de-ionized distilled water cycle; |
Dimension: |
350mm (W) ×550mm(L) ×1100mm(H) |
RF Frequency |
10MHz |
RF Energy |
1-100J/cm3 |
Filter Material |
Sapphire |
Screen |
8.4 inches color touch LCD screen |
Cooling System |
Semiconductor+water+wind cooling |
Power |
1500W |
Payment Terms: | TT in advance, West Union, |
---|---|