| Model: | - |
|---|---|
| Brand: | - |
| Origin: | - |
| Category: | Industrial Supplies / Construction Machine |
| Label: | - |
| Price: |
-
|
| Min. Order: | - |
| Last Online:30 Oct, 2020 |
| Rebar Thread Rolling Machine JH-40D | |||
| (Rebar Rib-stripping and thread rolling Machine） | |||
| The rebar thread rolling machine series is mainly used to process the ribbed rebar to provide the rebar head with parallel screw thread in construction. | |||
| JH-40D is easy to adjust. It adds the screw pitch angle mechanism. It is especially fit for the rebar splicing in bridge-piles and tunnel construction | |||
| 1. Peel ribs of rebar end | |||
| 2. Roll thread automatically | |||
| 3. Connect the thread rebar ends with rebar coupler | |||
|
Technical Parameters |
|
|
|
|
Electric motor power |
4KW |
|
|
|
Working voltage |
Three-phase380V/50HZ |
|
|
|
Rotate speed: |
40-62r/min |
|
|
|
Rebar Dia |
14mm-40mm |
|
|
|
Thread length |
100mm |
|
|
|
Thread pitch |
2.5mm, 3mm, 3.5mm |
|
|
|
Rebar standard |
HRB335,HRB400, HRB500 |
|
|
|
Gross weight |
390 KGS |
|
|
|
Dimension |
1250*750*1050mm |
||
---------------------------------------------------------------------------------------------------------
| Rebar Thread Rolling Machine JH-40E/F | ||||
| (Rebar Rib-stripping and Thread Rolling Machine) | ||||
| The rebar thread rolling machine series is mainly used to process the ribbed rebar to provide the rebar head with parallel screw thread in construction. | ||||
| JH-40E/F is safe to use and designed reasonable in construction operating. It can make much longer parallel threads on head of rebar. | ||||
| 1. Peel ribs of rebar end | ||||
| 2. Roll thread automatically | ||||
| 3. Connect the thread rebar ends with rebar coupler | ||||
|
Technical Parameters |
|
|
|
|
|
Electric motor power |
4KW |
|
|
|
|
Working voltage |
Three-phase380V/50HZ |
|
|
|
|
Rotate speed: |
62r/min |
|
|
|
|
Max output torque: |
400KN 530KN |
|
|
|
|
Rebar Dia |
14mm-40mm |
|
|
|
|
Thread length |
JH-40E 200mm |
|
|
|
|
|
JH-40F 300mm |
|
|
|
|
Thread pitch |
2.5mm, 3mm, 3.5mm |
|
|
|
|
Rebar standard |
HRB335,HRB400, HRB500 |
|
|
|
|
Gross weight |
530 KGS |
|
|
|
|
Dimension |
1250*750*1050mm |
|||
----------------------------------------------------------------------------------------------------------
| Rebar Thread Rolling Machine JH-40K | ||||
| (Rebar Rib-stripping and Thread Rolling Machine) | ||||
| The rebar thread rolling machine series is mainly used to process the ribbed rebar to provide the rebar head with parallel screw thread in construction. | ||||
| JH-40K not only adjusts freely in the range 14-40mm using the rib-stripping plate but also eliminates the problem that the rebar head with screw head often becomes bigger, further guaranteeing the construction quality. | ||||
| 1. Peel ribs of rebar end | ||||
| 2. Roll thread automatically | ||||
| 3. Connect the thread rebar ends with rebar coupler | ||||
|
Technical Parameters |
|
|
|
|
|
Electric motor power |
4KW |
|
|
|
|
Working voltage |
Three-phase380V/50HZ |
|
|
|
|
Rotate speed: |
49-62r/min |
|
|
|
|
Rebar Dia |
14mm-40mm |
|
|
|
|
Thread length |
65mm |
|
|
|
|
Thread pitch |
2.5mm, 3mm, 3.5mm |
|
|
|
|
Rebar standard |
HRB335,HRB400, HRB500 |
|
|
|
|
Gross weight |
450 KGS |
|
|
|
|
Dimension |
1250*750*1050mm |
|||
---------------------------------------------------------------------------------------------------
| Rebar Thread Rolling Machine JH-50 | ||||
| (Rebar Rib-stripping and thread rolling Machine) | ||||
| The rebar thread rolling machine series is mainly used to process the ribbed rebar to provide the rebar head with parallel screw thread in construction. | ||||
| JH-50 is to extend the dia of rebar. It is especially fit for the rebar splicing in bridge-piles and tunnel construction | ||||
| 1. Peel ribs of rebar end | ||||
| 2. Roll thread automatically | ||||
| 3. Connect the thread rebar ends with rebar coupler | ||||
|
Technical Parameters |
|
|
|
|
|
Electric motor power: |
5.5KW |
|
|
|
|
Working voltage |
Three-phase380V/50HZ |
|
|
|
|
Rotate speed: |
49-62r/min |
|
|
|
|
Rebar Dia: |
12mm-50mm |
|
|
|
|
Thread length: |
120mm |
|
|
|
|
Thread pitch: |
2.5mm, 3mm, 3.5mm |
|
|
|
|
Rebar standard: |
HRB335,HRB400, HRB500 |
|
|
|
|
Gross weight: |
450 KGS |
|
|
|
|
Dimension: |
1250*750*1050mm |
|||
---------------------------------------------------------------------------------------------------------
| Rebar Upsetting Machine & Rebar Threading Machine | ||||
| Bar Splice is a parallel thread mechanical splicing system designed for the connection of concrete reinforcing bars from Φ12mm~Φ40mm. | ||||
| 1. Use the rebar upsetting machine to forging the end of rebar. | ||||
| 2. Use the thread cutting machine to cut threads on the enlarged end of rebar | ||||
| 3. Use the coupler to link the two ends of rebar. | ||||
|
Technical Parameters |
|
|||
|
Rebar upsetting machine |
Rebar threading machine |
|
||
|
Pressure range (rebar) |
12mm-40mm |
Cutting rage (rebar) |
12mm-40mm |
|
|
Oil pressure flux |
5.6L/min |
Gyrating speed |
32r/min |
|
|
Max pressure |
63Mpa |
Reverse gear |
46r/min |
|
|
Electric power |
4KW |
Electric power |
2.5/3KW |
|
|
Dimension |
1225mm*570mm*1100mm |
Net weight |
590KGS |
|
|
Net weight |
620KGS |
|
|
|
