Home > Products > Construction & Decoration > Pipe, Tube & Parts > Pipe Fittings

1. High-density polyethylene (HDPE) has excellent chemical stability, resistance to aging and resistance to environmental stress cracking performance, wide temperature range, strong pressure. And has good mechanical properties.
2. The chemical stability. As the HDPE molecule has no polarity, so the chemical stability, except for a few strong oxidant, the most damaging effects of chemical media can not afford them. Do not breed bacteria does not scale, its circulation area does not decrease with the increase in running time, are environment-friendly products. 
3. The connection strength (mainly Butt, socket) joints less, no leaks.
4. The construction and convenient. As the HDPE pipe, light weight, easy handling and connection, so the construction of fast, easy maintenance, tight schedule and in the case of poor construction, its advantages become more pronounced.
5. The friction coefficient is small, flow, use of HDPE pipe for the material other than the same diameter pipe can be more traffic. In other words, the same request can be relatively small-diameter HDPE pipe.
6. flexibility and good will of the radial curvature, HDPE pipe may be slightly radial axial song, from the ground uneven and to some extent the impact of the settlement, you can take special protection measures, easy winter construction, 
7. Excellent wear resistance. Germany has been experimentally proved wear resistance of HDPE or even several times higher than copper. 
8. Compression capability, compared with the other pipe has a distinct advantage. 
9.Long life, and then ultraviolet radiation from the sun under the conditions of life of up to 50 years Pipeline applications: Polyethylene (PE) water supply pipeline Fuang rice used in municipal water supply, building water supply, the pipeline repair, industrial and water treatment and other fields, but not for fire service pipes.

Specification:

DN20*1/2F

DN20*3/4F

DN25*1/2F

DN25*3/4F

DN25*1F

DN32*3/4F

DN32*1F

DN40*1 1/4F

DN40*1 1/2F

DN50*1 1/2F

DN50*2F

DN63*2F