Home > Products > Security & Protection > Alarm

4-wire UV Flame detector with relay output

General Description 

The device is an ultraviolet-only flame detector designed to detect fires and provide alarm outputs directly from the detector while maintaing false alarm immunity. It detects in the ultraviolet spectral range for optimized speed of response. It is fast and capable to detecting the ultraviolet rays emitted by a buming substance and is used in high hazard appplications such as petrochemical plants,munitions factories and other areas where flammable or explosive liquids or solids are handled or stored.

The flame sensor adopts an ultraviolet photosensitive tube, with qualities of highly sensitive,reliable,dust-resistant,corrosion proof and moisture-resistant,therefore is not sensitive in sunlight,dust,oil,tolerance of fume,and humidity.Set in a standard calibration to detect a flames at a distance of 25 meters,which flame created by 2kg ethanol in a container of base 33x33cm,height 5cm.

SPECIFICATIONS

Operating Voltage Range:             12 to 28 VDC Volts

Standby Current:                 ≤10 mA @ 24 VDC

Alarm Current                   ≤30 mA @ 24 VDC

Spectrum:                      180~290nm

Detection Angle:                 120 degree

Detection Sensitivity:             Grade I, 25m@flame (Container 33cmX33cm,Height 5cm with 2Kg ethanol )

Relay Contact Load:              1A@DC24V

Normal Status:                   LED blinking in 5 seconds interval

Alarm Status:                    LED lit steady

Protection rating:                 IP 21

Operating Humidity Range:        10% to 93% Relative Humidity, Non-condensing

Operating Temperature Range:        -20°C to 55°C

Height:                           45 mm installed in Base

Diameter:                              103 mm

Weight:                          153g