Home > Products > Industrial Supplies > Machinery > Machine Tool

3-roller Hydraulic Plate rolling machine
The device is hydraulic 3-roller rolling machine, it used to bend plate into cylinder-shape, arc-shape in normal temperature. The up roller of the device can lift up and down, level left and right. Level move up roller to pre-bend the plate, let the up roller in asymmetrical location relative two bottom rollers. Up roller’s lift movement adopts hydraulic driven, and level move adopts mechanical driven. 
Model Unit W11S-16×2500 
Pressure under up-roller T 130 
The yielding limit of plate Mpa σs ≤245 
The max width of plate mm 2500 
The length of rollers mm 2600 
The max pre-bend thickness mm 12 
The max bend thickness mm 16 
Min diameter when full load mm Φmin500 
The straight edges mm ≤2-2.5×plate thickness 
The diameter of up-roller mm Φ300 
The diameter of down-roller mm Φ165 
The distance of two bottom rollers 270mm 
The diameter of support rollers 1group×4 Rolling speed m/min 5 
Main motor power KW 11
Hydraulic motor power 
KW 5.5 Move motor power 
KW 2.2 Electric system 
V/HZ 380/50