Home > Products > Electronics & Electricity > Optical Fiber, Cable & Wire > Optical Fiber

The isolator is built based on TEC (Thermal Extending Core) technique, so that expand the optical aperture of output and input
optical part surface, which can handle high power handling, say 1~10W CW laser.
Non‐PM type (HPISO)
4. Specifications
‐40 to +85
PM type (HPMISO)
‐5 to +70
Parameters
5.5x35
Power handling (CW)
Return loss (Input/output)
Fiber Type
Type
Center wavelength
Bandwidth
SMF‐28e or G657A etc. PM 1310, PM1550 Panda
1310, 1550, other on demand
Isolation at 23℃(dB)
Insertion Loss at 23℃
Extinction Ratio
PDL
±20
Peak isolation
P1 P2
Ф5.5
35
55
Example1(Non‐PM type): HPISO‐S‐1550‐5‐F‐0‐5.5x35‐0.8m
Example2 (PM type): HPMISO‐D‐1550‐3‐F‐0‐5.5x35‐0.8m
Stage
S=single
D=dual
Wavelength
13=1310nm
15=1550nm
Working axis
F=Fast block
B=Both axis working
Only available for PM
type
Pigtail
type
0=Bare
1=0.9mm
Connector
& Fiber length
For >1W power,
w/o connector is
recommanded
Package
5.5x35
HPISO(non‐PM)
HPMISO (PM)
Power
handling
1=1W
5=5W
10=10W
www.inteoptix.