| Model: | SS |
|---|---|
| Brand: | JS |
| Origin: | Made In China |
| Category: | Metallurgy , Mining & Energy / Metallurgy & Mining / Non-ferrous Metal Products |
| Label: | Auto Sprayer , Automatic Sprayer , Spraying Machine |
| Price: |
US $10000
/ set
|
| Min. Order: | 1 set |
| Last Online:18 Dec, 2015 |
Automatic Spraying Machine
1. With front base or rear base options, can increase production speed, the machine is robust.
2. It can be used independently or interface with die cast machine, extractor, ladler and press machine to form complete automated production.
3. Installed with at least two custommade atomizer, to improve the spray in both stationary and movable die, adjustable water volume, and the effect of atomization becomes more prominent when doing thin casting.
4. Die release agent spray time can be done separately for stationary and movable die.
5. It can carry out air blowing operation while ascending, simultaneously cleaning the stationary and movable die while ascending, maintaining a clean mold surface.
6. The spray volume can be regulated.
7. The ascending and descending speeds are stable; descending speed can be abruptly reduced in order to extend the life of shock absorber. Equipped with anti drop locking device, this will prevent the spray head from dropping in case of air pressure cut-off.
8. Spray can also be installed on middle row, allowing use of two different release agents that would give better results.
9. Uses PLC control circuit, with build-in error code display, for easier maintenance
Specification For Automatic Spraying Machine
|
Specification/model |
SR1 |
SR2 |
SR3 |
SR4 |
|
|
suitable die-casting machine |
150-200T |
250-400T |
500-630T |
650-800T |
|
|
Copper tubes (fixed mold) |
19pcs(φ6) |
21pcs(φ6) |
24pcs(φ6) |
||
|
Copper tubes (midst) |
18pcs(φ6) |
20pcs(φ6) |
23pcs(φ6) |
||
|
Copper tubes (movable mold) |
19pcs(φ6) |
21pcs(φ6) |
24pcs(φ6) |
||
|
Input air pressure |
4.5-6.5kgf/cm² |
||||
|
Air pressure inlet |
PT1” |
PT11/4” |
|||
|
Release agent |
5-6kgf/cm²
|
||||
|
Release agent inlet |
PT1/2” |
||||
|
Adjustable horizontal distance |
±200mm |
±325mm |
± 325mm |
||
|
Ascending time |
1.5s |
1.6s |
1.8s |
2.1s |
|
|
Descending time |
1.1s |
1.5s |
1.6s |
||
|
Number of atomizer |
2 |
2 |
|||
|
Length of spray head |
350mm |
420mm |
480mm |
||
|
Length of copper tubes |
long |
470mm(14pcs) |
570mm(14pcs) |
670mm(14pcs) |
|
|
short |
470mm(42pcs) |
470mm(48pcs) |
570mm(57pcs) |
||
|
Power supply |
2φ-380V/220V/DC24V |
||||
|
Spraying time for release agent
|
fixed mold9.9secs. (Max) Movable mold9.9secs. (Max.) |
||||
|
Water volume for release agent |
water volume for fixed and movable mold is adjustable |
||||
|
Center distance |
center distance between fixed mold and atomizing nozzle is 110mm±20mm |
||||
|
Weight of machine |
280KG |
285KG |
350KG |
355KG |
|
