Home > Products > Electronics & Electricity > Other Electrical & Electronic

VARIANT 250W box mod

Features:

• Pulse mode
• Lock setting and power saving feature
• In Variable voltage mode the VARIANT can be adjusted from 2.0-8.4 volts at 2cell lithium Polymer battery( or 2.0-12.6 volts at 3cell Lithium Polymer battery)
• In Varible wattage mode the VARIANT can be Adjusted from 5.0-250 watts in 0.1 watt increments
• 1.3” OLED display that shows all the important parameters of your unit
• Translucent light indicator on the top of the unit that visually alerts you on the status of your VARIANT
• 15 second cut off power if the button is held down for too long
• Battery monitoring shuts the VARIANT off once the battery has reached the end of the charging
• 30amp limiting system protects against over current situations
• The VARIANT allows you to use an atomizer with a resistant of at least 0.2ohms
• Designed to use a 2cell, 7.4V Lithium Polymer batteries( or 2.0-12.6 volts at 3cell Lithium Polymer battery)

 POWERING UP THE VARIANT:

• Slide off the back cover of the VARIANT, this will give you access to the battery compartment
• Connect your 2cell Lithium Polymer battery to the VARIANT, MAKING SURE THE POLARITY OF THE BATTERY MATCHES THAT WITH YOUR UNIT. RESERVE POLARITY MAY VOID YOUR WARRANTY. 
• Slide back the back cover to close the unit
• Press the POWER button, the center button( B) in front of the unit for at least 2 seconds to turn on your VARIANT

SWITCHING MODES:

• To switch the VARIANT between variable voltage , wattage and pulse mode, press the power button(B) 5 times

VARIANT IN VOLTAGE MODE:

• By default upon start up the VARIANT runs in variable voltage mode. This mode allows you to adjust the voltage of the VARIANT
• To increase the voltage setting. Press the increase button(A) to raise the voltage of the unit
• To decrease the voltage setting. Press the decrease button( C ) to lower the voltage setting of the unit
• To minimum voltage setting is 2.0volts

VARIANT IN WATTAGE MODE:

• In variable wattage mode. This mode allows you to adjust the wattage of the VARIANT
• To increase the wattage setting. Press the increase button (A) to raise the wattage of the unit
• To decrease the wattage setting. Press the decrease button ( C) to lower the wattage setting of the unit. The minimum wattage setting is 5.0watts.

VARIANT IN PULSE MODE:

• To use the pulse mode. Press the increase button (B) to raise the voltage of the unit, simulating the quick pressing and depressing of a mechanical mod
• The voltage will go up to 6.0V max
• To decrease the voltage setting. Press the decrease button(C ) to lower the voltage setting of the unit

LOCKING AND POWER SAVING:

• Press power button ( B) and firing button (D) at the same time to lock and repeat to close screen
• SLEEP ( screen shuts off when idle for 30 seconds)

NOTES:

• If not in use for a long time, unplug the lithium battery from the unit
• Do not tamper the circuit board of your VARIANT, doing so will void the warranty.