Home > Products > Industrial Supplies > Rubber & Plastics Machine

~Extrusion Line Synchronization Made Easy. With an IKV gear pump between your extruder and die you can directly dial in gauge control, eliminating extruder surge and screw beat at the die. Extruder screws efficiently melt, mix and convey polymer, but are not as efficient at providing a consistent pressure and volume to the die. A melt pump, while not a mixing or melting device, is extremely efficient at building pressure and metering the polymer output.
The additional control of a IKV Gear Pump installation also provides you with more production line flexibility, first by shortening start-up times on difficult materials and second, by processing multiple polymers with the same screw. The IKV Control closes the loop from pump inlet pressure to extruder drive while monitoring downstream pressure to eliminate any problems due to downstream line stoppage.
This series of melt pump adopts electric heating, and application to PS, PP, PET, PVC, PC, PMMA, PA, ABS, etc.

The IKV Melt Pump is a positive displacement device which provides a linear output over a wide range of operating conditions.
A closed-loop drive control varies extruder screw speed to assure an adequate amount of polymer to the pump regardless of inlet pressure variations due to extruder surge and screw beat. Precise construction makes IKV Melt Pumps extremely accurate volumetric metering devices. Each gear tooth “bucket” carries a precise, repeatable amount of polymer melt to the output side of the pump.

Integrate the Systems
Put an IKV Screen Changer in front of the IKV Melt Pump and further increase the productivity of the extrusion line all from one company.

Technical Parameter
Volume Range: 0.5CC - 6400CC
Viscosity: ≤40000 Pas
Working temperature: ≤400℃(750°F)
Inlet pressure: ≤12MPa (1740 Psi )
Outlet Pressure≤ 40Mpa (5800 Psi )
Differential pressure: ≤25MPa (3625 Psi )

Melt Pump Options:

Adaptors
Control Systems
Drive Systems
Manual Screen Changers
Single Plate Screen Changers
Double Plate Screen Changers
Continuous Screen Changers
Single Column Single Working station Screen Changers
Double Column Double Working Station Screen Changers
Film , Sheet, Board T-die Benefits:

Material Savings
Increased Output
Increased Extruder Life
Faster Start Ups
Lower Processing Temperature
More Accurate Gauge Control
Reduced Scrap
Lower Shear Stress
Process Recycled Materials
Fast Paybacks
Sizes Available for all Products/Extruders