Home > Products > Industrial Supplies > Mining Machine

Mesh belt dryer

Usages:

The mesh belt dryer plant is designed for dewater, remove extra water from the fresh 

final briquettes like coal briquettes , charcoal briquettes , fertilzer briquettes , mineral 

briquettes and other briquettes with a certain shape. The mesh belt dryer is operated in 

the low temperature range of 80~250°c. Thus a high thermal effciency is achieved and 

the dryer operates at a high availablity in a safe and dust free atmosphere .

Advantages :

The dryer can be used in drying the material like fresh final briquettes like coal briquette , charcoal briquettes , fertilzer briquettes , mineral briquettes and other briquettes with a 

certain shape . The dryer installation adheres to strict emission limits for noise , air quality and odour.  Due this mesh belt dryer is an horizontal dryer , during briquettes drying , no final briquettes breaks and you will get perfect dry briquettes you want with a certain 

shape. 

Introduction:

 Mesh belt dryer  is continuous type drying equipment, used for permeability good sheet, strip, granular materials, .The main heating mode are electric  and steam , hot air .

Its main principle is to put the material evenly spread in the net, net belt with 12-60M steel mesh belt, reciprocate by dragging gear in the dryer, hot air between the 

material flows and water vapor from Moisture discharge hole, so as to achieve the 

purpose of drying.The cabinet  length is made up by the standard section, in order to 

save space, the dryer can be made into multilayer type, there are two chambers three

 layers , two chambers five layers, according your request.

Features:

1. Hot air go through material layer from bottom to top and from top to bottom, it     increases the contact area of material and hot air and also the drying intensity.
2. We adopt unique internal air blowing device. It not only increases the relative speed of material and hot air and drying intensity but also the uniform drying of materials.
3. It is fully enclosed structure. There is no outer air pipes except the dehumidifying air pipe, thus the materials won’t be polluted and the heat efficiency and working condition are improved.

4. It is easy to contact with all parts inside the main machine, so it's easy for cleaning.
5. The belt speed can be controlled easily to guarantee the final moisture of products.
6. Easy to assemble, after assembling the conveyor hoister the machines can be working.

Technical parameters:

Packing:

Complete machine will be packed in wooden case then load into container.

Delivery time:

Within 15-20 days after received your payment.

 Warranty:

Complete machine: 1 year.

Wear Parts:3-6 months