Home > Products > Electronics & Electricity > Other Electrical & Electronic

This machine is manual high precision screen printing machine, no electric and pneumatic parts (except pneumatic draw stem).

The machine realize the movement of the scraper, through precision guide rail to ensure seamless contact between scraper and templates, to ensure the accuracy of the printing.

Using adsorption platform of magnetic universal plunger plunger and fixed platform complete precision alignment and support for PCB, to ensure that the printing precision mold release. At the same time for various types and various shapes printed circuit board.

The semi-automatic printer two sides fixed techniques to realize precision installation template, very convenient installation template.

The whole machine adopts double blade design, adjust the squeegee pressure through mechanical limit adjustment, scraper adopts adaptive design at the same time. Through mechanical insurance at the same time to complete the balance of the two knife up and down position

The machine fixed template fixed frame can be adjusted through the circular shaft guide, different size of templates can be very convenient installation in this machine.

The rise and fall of template completed by manual, cooperate with pneumatic draw stem easily accomplished

Native four axis x, y, z and Angle can be precision adjustment, by adjusting the four axis implementation of PCB solder joint and fixed on the template framework template corresponding one to one correspondence of the perforated coordinates, and through the platform of up and down to adjust the distance between the PCB and templates.

Scraper fixed and run on the parallel guide rail, blades can be divided into before and after the blade, interaction can rise, fall, after completion of one step before (after) scraper to printing position, and then backwards (former) movement, movement is finished, before (after) scraper to rise to the original position, printed.

The biggest printing area: 300 * 400 mm

Biggest steel plate size: 350 * 450 mm, width adjustable template framework, locating at four o 'clock plane, to ensure that the PCB and the levelness of the template.

Scraper size: 304 mm, 300 mm (optional), before and after stroke is greater than 410 mm

(blade surface and blade Angle template surface) : 60 degrees

Blade material: stainless steel (or make to order other materials)

Adjustment: precision less than 0.01 mm

Repeat precision: less than 0.03 mm, repetitive error minimal.

Ideal biggest printing precision: 0.4 mm IC; BGA solder ball is greater than 0.5 mm

Ideal biggest printing speed: 500 yuan/hour