| Model: | S-2600 |
|---|---|
| Brand: | Raysco |
| Origin: | Made In China |
| Category: | Electronics & Electricity / Other Electrical & Electronic |
| Label: | impinj r2000 reader , Impinj R2000 module , R2000 reader module |
| Price: |
US $485
/ pc
|
| Min. Order: | 1 pc |
| Last Online:20 Apr, 2015 |
Long Range Impinj R2000 UHF RFID Reader Module
Long Range UHF RFID Reader ModuleNote: The price usd485/unit is for the reader with rs232 connector , if you need tc/ip connector ,need more usd50(USD500+USD50=USD550/unit), so if you need tcp/ip ,please chat me ,thanks your support !
Reader Parameter:
|
Operating Voltage |
3.7V-5 V |
|
Standby Mode Current |
less than 50mA(EN pin set high) |
|
Sleep Mode Current |
less than100uA (EN pin set low) |
|
Operating Current |
1.2A +/-10% |
|
Operating temperature |
- 20 - + 55 |
|
Storage temperature |
- 20 - + 85 |
|
Humidity |
less than 95% ( + 25 ) |
|
Air Interface Protocol |
EPCglobal UHF Class 1 Gen 2 / ISO 18000-6C ISO 18000-6B |
|
Spectrum Range |
860Mhz – 960Mhz |
|
Supported regions |
US, Canada and other regions following U.S. FCC Europe and other regions following ETSI EN 302 208 with & without LBT regulations Mainland China Japan Korea Malaysia Taiwan |
|
Output Power |
20 – 33dBm |
|
Output Power precision |
+/- 1dB |
|
Output Power Flatness |
+/- 0.2dB |
|
Receive Sensitivity |
less than -85 dBm |
|
Peak Inventory Speed |
more than 700 tags/sec |
|
Tag Buffer Size |
1000 tags @ 96bit EPC |
|
Tag RSSI |
Supported |
|
Antenna Detector |
Supported |
|
Ambient Temp Monitor |
Supported |
|
Working Mode |
Single/DRM |
|
Host Communication |
TTL Uart |
|
GPIO |
2 inputs; 2 outputs |
|
Max Uart Baud Rate |
115200 bps |
|
Heat Dissipation |
Air cooling |
Attention
1,When the ambient temp detector detects that the temperature is over 60, please stop inventory/read/write operation till it is cooler.
2,Please connect a metal cooler to the module for full duty operation.
3,The absolute max rating of power supply voltage is +5V DC. Higher voltage can cause permanent damage.
4,When output power is set above 30dBm, power consumption and heat generation increase significantly, please make sure if it’s necessary.
2,Reader Feature :
Impinj 4 ports uhf reader rfid / epc gen2 multi-tag 840-960mhz passive fixed reader TCP/IP RJ45/Ethernet rs232
Impinj 4 ports uhf reader rfid / epc gen2 multi-tag 840-960mhz passive fixed reader TCP/IP RJ45/Ethernet rs232
3,Reader Picture Showing:
Anti-Collision Algorithm Comparison
