| Model: | W-25&W-12P |
|---|---|
| Brand: | CVR |
| Origin: | Made In China |
| Category: | Consumer Electronics & Lighting / Other Consumer Electronics |
| Label: | Active line array , mini line array , indoor line array |
| Price: |
-
|
| Min. Order: | 2 pc |
| Last Online:15 Jul, 2015 |
W-25 is a line array system which is made of two 5" woofers, a 1.4" compression driver and high performance low distortion compression driver with innovative horn design of wave phase philosophy. Wherever low frequency extension is required, a W-25 will integrate seamlessly with W-12P line array sub-bass system in a standard configuration. Each enclosure is equipped with rigging system, allowing flown array to be constructed rapidly and safely. W-25 is very versatile and scalable for a wide range.
W-12P is a dedicated high performance sub-bass system designed to augment the low frequency output of W-25. The W-12P features a highly efficient power amp module and incorporate DSP. This efficient design enables the flown combination of W-12P and W-25.The physical dimensions of W-12P are identical to the W-25 and it's equipped with the same proprietary rigging system.It's features with two 10 inch woofer with magnet structure and suspensions engineered for maximum.
| Model | W-25 ＆ W-12P(Active) |
| Type | Line arry system
line arry sub-bass system(W-12P) |
| Frequency Response | 80Hz-20KHz±3dB
45Hz-600Hz±3dB(W-12P) |
| Power handling | 200W(RMS)400W(PEAK)
500W(RMS)1000W(PEAK)(W-12P) |
| Power amp | 2X600W/4ohm + 1X900W/8ohm (W-12P) |
| Amplifier type | Switching power amp, class D circuit |
| Other functions | Bluetooth，DSP (W-12P) |
| Sensitivity | 93dB(1W@1M)
100dB(1W@1M) (W-12P) |
| Max@S.P.L | 112dB(PEAK/1M)
131dB(1W@1M)(W-12P) |
| HF section |
1×1.4"compression driver with34mm
|
| LF section | 2×5"(135mm)woofer 35mm(1.5in)coil
1×12"(310mm)woofer(W-12P) 100mm(4in)coil (W-12P) |
| Nominal impedance | 16 ohm
8 ohm (W-12P) |
| Output section | 2-channel |
| Dispersion pattern | 110º H×9º V |
| Surface finish | Black paint |
| Array design | Arrays of less than 3×W-25 will provide
poor dispersion control and are neither recommended nor supported |
| Speaker cables | 1(+)1(-) Built in crossover |
| Rigging system | Please refer to the W-25 user's
manual before any operation |
| Input connectors | 2×NL4MP speakon |
| Recommend crossover | 80Hz-20KHz
40Hz-120Hz(W-12P) |
| Dimensions | 410×163×248mm(W×H×D)
408×392×494mm(W×H×D)(W-12P) |
| Package dimensions | 480×230×320mm/0.04cbm
480×460×565mm/0.1cbm(W-12P) |
| Enclosure | HLPE(W-25)/Plywood(W-12P) |
| Net weight | 7.8kg(W-25)/25kg(W-12P) |
| Gross weight | 9kg(W-25)/27.5kg(W-12P) |
