Home > Products > Electronics & Electricity > Electrochemical Products

Specifications
Fresh and elegant pattern 
Good anti-wrestling character 
Thin and light body 
Built-in Bluetooth of 4.0 low-power module 

Product Description
u Fresh and elegant pattern
u Four-way OLED display of 0.95 inches
u Good anti-wrestling character, still working properly even after dropping from the high place of 1.2m
u Thin and light body with 24mm thick and 36 g weight
u Built-in Bluetooth of 4.0 low-power module, longer time for use.
Technical Parameter
It is designed for the home care and hospital customer.
Features:
1, Display Mode:0.96" Dual-color OLED display(blue and yellow)
2,Display content: SpO2 value , Pulse rate value , Pulse rate waveform ,bar graph, battery voltage display;
3,Different display mode. There are four display modes, and the display mode can be changed by pressing the key;
4,Pulse synchronization function. The pulse waveform, pulse mark, and bar graph are synchronous with the pulse beep.
5,Pulse Beep function. The pulse beep is synchronous with the pulse and can be off automatically ;
6,Alarm function. When the measurement result is out of the pre-setting threshold, the measurement result will sparkle;
7,voltage indication: voltage indicator always appears;
8,Automatically power off function: when the device is under the state of measuring interface. It will automatically power off within 60 seconds if the finger falls out of probe.
9,SpO2 Measuring Range:0%~100%, (the resolution is 1%).
Accuracy:70%~100%:±2% , Below 70% unspecified.
10,PR Measuring Range:18bpm~250bpm, (the resolution is 1bpm)
Accuracy:25bpm~250bpm:±3bpm ,Other range unspcified
11,Measurement Performance in Weak Filling Condition: SpO2 and pulse rate can be shown correctly when pulse-filling ratio is 0.4%. SpO2 error is ±3%, pulse rate error is ±2 bpm or ±2% (select larger).
12, Power Consumption:less than 20mA
Voltage: DC 3.5V~4.2V