Home > Products > Metallurgy , Mining & Energy > Metallurgy & Mining > Wire Mesh

Specifications

Stainless Steel Square Wire Mesh

1.plain weave and twill weave

2.304,316 stainless steel wire

3.square wire mesh

4.ISO

Stainless Steel Square Wire Mesh

Varieties of Stainless Steel Wire Mesh Square Opening:

Stainless Steel Square Wire Mesh produced by us is classified into two types according to the weaving patterns: Stainless steel square wire mesh plain woven Stainless steel square wire mesh twill woven

Stainless Steel Wire Mesh Plain weave is the most commonly used weave. Each warp wire crosses alternately above and below each weft wire. Warp and weft wires generally have the same diameter.

Twill Weave Stainless Steel Wire Mesh is made by each weft wire passing alternately over two, and then under two successive warp wires and each warp wire passing alternately over two and under two successive weft wires. It is possible to be used to allow a heavier than standard wire diameter.

Stainless Steel Square Wire Mesh Uses: Stainless steel wire mesh and stainless steel wire cloth products are widely used in petroleum, chemical industry, environment protection, mine, airspace, paper-making,electronic, metallurgy etc. Special size and specification are available according to customers' requirement.

Stainless Steel Square Wire Mesh Sizes: Standard roll width of stainless steel square wire mesh: 1m to 48" Standard roll length of stainless steel square wire mesh: 30m to 100"

Brief introduction of Square wire mesh 10mm with high quality:

Specification