Home > Products > Electronics & Electricity > Telecommunication & Broadcasting > Other Communication Equipment

JS 11

R ed Waterproof Jump Starter

IP-54 Water Spray Resistant

Dual-USB Port

Battery Capacity: 10,000mAh (37Wh)

Size: 145*78*28mm

Weight: 350g

Input: 5V/2A, 15V/1A

Output:

5V/1A ,5V/2.4A(mobile phone, tablet PC, E-book, MP3/MP4 player, PSP, etc.)

12V Car Jump Start

0.5W LED Light

Start Current: 200A

Peak Current: 400A

Operating Temperature: -20 degree~60 degree

Accessories:

1. Home Charger

2. Car Charger

3. Jumper Cable (Boost Cable)

4. 3-in-1 USB cable (Micro USB, iPhone 4 & iPhone 5)

5. User Manual

Packaging:Nylon Case+Color Box

Size of Color Box: 250*125*75mm

Weight of Whole Set: 0.9Kg

The do's and don'ts for jump-start

1. Please wait for at least 10 seconds before jump starting the second time.

2. When the booster cables are Inserted in the jumpstart socket, do not contact red clip and black clip with each other.

3. The car jump start procedures can not be disordered.

4. Do make sure the jumper clamps connect the positive and the negative right.

5. Do not do the jump-start when the LED indicator is less than 3 LED lights.

6. Do remove the jump starter from the booster cable within 30 seconds after the vehicle starts.

Warning

1. Unauthorized disassembly results in no warranty.

2. Please do not place the product in a strong magnetic field range which might cause some damage to the product.

3. This product is not waterproof. Please keep it from the rain, moist, water or even any other liquid, which might cause short circuit to the product.

4. This product has large current discharge, please keep it away from children

5. Please keep the product placed safe and fixed.

6. Do not throw the product into the fire, which will cause pollution and explosion.

7. To enhance the battery life, please charge it to the fullest at least once in six months.

8. The product can not be a substitute of automotive battery. It’s only used as an emergency power supply for the automotive.

9. The product’s working temperature is between -30 ℃- 80 ℃.

10. Please do not do reverse connection or inter-connection of positive and negative pole, which easily cause short circuit and even explosion.

11. Please check the LED indicator before starting vehicles. Do not do the jumpstart when only one LED light is on.   

12. Please keep the product in a cool dry place to avoid direct sunlight.

13. When in charge, do not place the product on inflammable and explosive materials.

14. Please do not bash or throw the product.