| Model: | 8200-8 -16 |
|---|---|
| Brand: | wld |
| Origin: | - |
| Category: | Security & Protection / Alarm |
| Label: | CONVENTIONAL FIRE AL , fire panel , panel |
| Price: |
US $93.3
/ pc
|
| Min. Order: | 100 pc |
| Last Online:28 Jul, 2015 |
Introduction
NW8200L 8 to 16 zone panels has been designed to meet the requirement of an easy to use fully functional fire alarm control panel. It is available as either a 8 zone panel, 12 zone panel or an16 zone panel. Each version has 4 sounder circuits, an alarm relay, and a fault relay.
The sounder circuits can have a programmable delay set.
There is no configuration, simply connect the detectors & sounders and apply
Phone Alarm
The alarm can be connected to five sets of pre-configured telephone number (this feature is optional)。
Connecting the mains.
The Mains supply to the FACP is fixed wiring, using Fire resisting 3-core cable (Between 1 mm² and 2.5mm²) or a suitable 3-conductor system, fed from an isolating double pole switch fused spur, fused at 3A.
IT SHOULD NOT BE CONNECTED THROUGH AN RCD. This should be secure from unauthorised operation and be marked ‘FIRE ALARM: DO NOT SWITCH OFF’. The supply must be exclusive to the Fire Panel.
MAKE SURE ANY SPARE ENTRY HOLES ARE COVERED WITH THE GROMMETS PROVIDED
Connecting the batteries
NW8200L requires 2 x 12 V 1.2Ah sealed lead acid (SLA) batteries
The two batteries are wired in series.
The +V of one battery is connected to the red battery lead.
The –V of the other battery is connected to the black battery lead.
The –V of the first battery is connected to the +V of the second battery using the link wire supplied.
Although there are many sizes of suitable battery, the sizes we usually recommend are 12V 1.2Ah for standard backup, or 12V 4Ah for extended backup (36 hour or more), and the enclosure has been designed to hold these two battery sizes.
