Home > Products > Electronics & Electricity > Electronic Instrument > Analysis Instrument

This equipment is 8 channels per set, and 10 sets for one rack, 80 channels.

Battery type can be tester: pack tester for Li-ion, LiFePO4, Ni-MH, Ni-CD and lead acid battery.

Items can be tested:
Current, voltage, power, DCIR,capacity, cycle test, Pulse test, etc
Reliable hardware with independent constant current and voltage control.

8 Channels Battery Tester Hardware Features
1)According to the international standard design, each channel of the system has an independent constant-current source and a hardware     constant-voltage source which make system stable & reliable
2)Modular design leads to easy maintain
3)Different holder selectable, satisfy your different needs
4)Efficient heat dissipation system, ensure proper working of equipments under 24hrs full load condition
5)Double loop-control adopted,no peak occured from CC to CV, protect the battery

8 Channels Battery Tester Software Features
1)Each channel available for indepent program testing,Step continuable after Pause in any conditions(including blackout)
2)Host computer adaptable to all kinds of lower machine,with interactive interface,easy to operate
3)Fast data acquisition,sensitive to the changing of current & voltage,(AD ,16bit),dairy function available
4)Powerful for data and chart processing ,support four types of report with various form formats

Input Power     AC 220V ±10% / 50Hz
Input Active Power    365     W
Resolution    AD：16bit；DA：16bit
Input Resistance    ≥1MΩ
Voltage    Per Channel Constant Voltage Control Range    0.05V~10V
Lowest Discharge Voltage    2.5V
Accurancy    ± 0.1%  of  FS
Stability    ± 0.1%  of  FS
Current    Per Channel Current Range    0.015A~3A               
Accurancy    ± 0.1%  of  FS
Constant Voltage Stop Current    0.006A
Stability    ± 0.1%  of  FS
Power    Per Channel Output Power     30W
Stability    ± 0.2%  of  FS
Time    Current Response Time    Maxmum Current ≤20ms
Data Recording    Record Condition    Minimum Time Interval：100ms
Minimum Voltage Interval：20mV
Minimum Current Interval：6mA
Record Frequency    10Hz
Charge    Charge Mode    Constant Current Charge、Constant Voltage Charge、Constant Curren and Voltage Charge、Constant Power Charge
End Condition    Voltage、Current、Relative Time、Capacity
Discharge    Discharge Mode    CCD、CPD、CRD
End Condition    Voltage、Current、Relative Time、Capacity、Voltage Interval
Pulse Test    Charge    CCC CCP
Discharge    CCC CCP
Minimum Pulse Width    500ms
Pulse number    32 diffirent pulse for a single step
Charge and Discharge Constant Switch    Support continuous switched in a single pulse step
End Condition    Voltage、Relative Time
DCIR Test    Support
Cycle    Loop Measure Range    1~65535 times
Max Steps Per Loop     254
Nested Loop    Nested loop Function，Max Support 3 Layers
Protection    Software Protection    ● Power-down Data Protection
● Off-line Testing Function
● Setting Protection Condition，Setting Parameter：Low Voltage limit、Upper Voltage limit、Low Current limit、Upper Current limit、Delay Time
Hardware Protection    Additional Anti-reverse Protection Model
Channel Control    Independent control per channel
Voltage and Current Testing Sample    4-wire connecting
Noise    <85dB
Database    MySQL
Upper Machine Cummunication mode    Based on TCP/IP
Data Output     EXCEL2003,2010、TXT
Server disk configuration    500GB
 Leak Current    0.01mA
Server Operating System    Windows XP,Windows 7
Communication Interface    Internet Access

****Different Specifications could be customized ,Ranging from 1mA-3000A, 5-800V;)****
If you are interested in NEWARE battery testing equipment, pls contact us !
Elley Wang Mobile:15913168930  Skype:elleywangyao   Email: elley.wangyao@gmail.com   /  wangyao@neware.com.cn