Model: | GYM260/GYM350 |
---|---|
Brand: | IDER |
Origin: | Made In China |
Category: | Construction & Decoration / Door / Other Doors |
Label: | Industria Gate , Industry Gate , Roller shutter |
Price: |
¥3200
/ pic
|
Min. Order: | 20 pic |
Last Online:29 Jun, 2024 |
Rolling Gate/Door Operator
Enjoy your Life
==========================
1. This door machine must be installed and deb ed by professional installer.
2. Corresponding installation and wiring shall be in accordance with the Construction Criteria, and wires diameter ≥ 1.5 mm2. Ensure the power source has sound earth grinding, and the grinding wire shall tightly connect into grounding plate. Cutting away the grinding lead wire is prohibited. Earth leakage protection device fulfilling corresponding national criteria shall be firmly set at the front end of the inlet power source.
3. This Industrial Door Machine is only applicable for door with sound balance and Spring-Balanced, or the Machine would likely be destroyed by overloading.
4. The door shall run freely and without any seizure wear. Each end of the door rail shall have one restrictor or a buffer booster to avoid the door slipping from the guide rail.
5. Control box shall be installed on wall or volume from where the door's operation condition can be visually observed, and with at least 1.4 meters distance above floor level so that children could no longer touch it. For the sake of children's safety, remoter shall be kept away from kids. Operating the door remoter at a place invisible of the door's running condition is prohibited.
6. Electricity supply system of both door-opening machine and control box shall be cut off if maintenance and removal required. Door shall be checked before maintenance and removal to ensure it is in lock-up condition and there is no any sign of falling risk.
7. No any entrance or stay is allowed once the door is running.
8. Pulling the hand chain of this machine is prohibited when the door machine is in operation, since it will easily damage the door.
9. For equipment with shift clutches, pulling ropes of the shift clutches is prohibited unless otherwise the door is in definite close status; and no any other conditions are allowed for rope drawing.
10. For the sake of safety of people and cars passing by, infrared safeguard device and gasbag preventative devices shall be available.
Industry Sectional Doors Sectional Door Drives,Flange Motor,Direct Drives,
Single phase
--GYM50-1 AC220V, Max. Torq. 40N.M, For ≤ 18SQ.M.Gate. Mechanical LT
--GYM50Y-2 AC220V, Max. Torq. 40N.M, For ≤ 18SQ.M.Gate. Electronic LT (ALL-IN-ONE)
--GYM50-2 AC220V, Max. Torq.40N.M, For ≤18SQ.M.Gate. Electronic LT
--GYM70-1 AC220V, Max. Torq. 60N.M, For ≤25SQ.M.Gate. Mechanical LT
--GYM70-2 AC220V, Max. Torq.60N.M, for ≤ 25SQ.MGate. Electronic LT
--GYM70Y-2 AC220V, Max. Torq.60N.M, for ≤ 25SQ.MGate. Electronic LT (ALL-IN-ONE)
--GYM100-1 AC220V, Max.Torq. 100N.M,For ≤30SQ.M. Mechanical LT
--GYM100-2 AC220V, Max.Torq. 100N.M,For ≤30SQ.M.Gate Electronic LT
--GYM100Y-2 AC220V, Max.Torq. 100N.M,For ≤30SQ.M.Gate Electronic LT (ALL-IN-ONE)
--GYM50-1 AC220V, Max. Torq. 40N.M, For ≤ 18SQ.M.Gate. Mechanical LT
--GYM60S-3 AC220V, Max.Torq 60N.M, For ≤25SQ.M.Gate Frequency Conversion&Electronic LT
--GYM100S-3AC220V, Max.Torq. 100N.M,For ≤30SQ.M.Gate Frequency Conversion&Electronic LT
--GYM150S-3 AC220V, Max.Torq.150N.M, For ≤40SQ.MGate Frequency Conversion&Electronic LT
Three phase
--GYM60S-1 AC380, Max. Torq. 60N.M, For ≤ 25SQ.M. Gate. Mechanical LT
--GYM100S-1 AC380V, Max. Torq. 100N.M, For ≤35SQ.M. Gate. Mechanical LT
--GYM150S-1AC380V, Max. Torq.150N.M, For ≤40SQ.M.Gate. Mechanical LT
--GYM60S-2 AC380V, Max. Torq.60N.M, for ≤ 25SQ.M.Gate. Electronic LT
--GYM100S-2 AC380V,Max.Torq100N.M, For ≤35SQ.M.Gate Electronic LT
--GYM150S-2 AC380V,Max.Torq.150N.M,For ≤40SQ.M.Gate Electronic LT
--GYM150S-3 AC380V, Max.Torq.150N.M, For ≤40SQ.M.Gate Frequency Conversion&Electronic LT
--GYM200S-1 AC380V, Max.Torq.200N.M, For ≤60SQ.M.Gate Mechanical LT
--GYM200S-2 AC380V, Max.Torq.200N.M, For ≤60SQ.M.Gate Electronic LT
--GYM350S-1 AC380V, Max.Torq.350N.M, For ≤70SQ.M.Gate Mechanical LT
--GYM350S-1 AC380V, Max.Torq.350N.M, For ≤70SQ.M.Gate Electronic LT
--GYM500S-1 AC380V, Max.Torq.500N.M, For ≤100SQ.M.Gate Mechanical LT
--GYM500S-1 AC380V, Max.Torq.500N.M, For ≤100SQ.M.Gate Electronic LT
High Speed-Door Operator
--GYJ40 AC220V 800W 40N.M 135RPM
--GYJ60 AC220V 800W 60N.M 90RPM
--GYJ50 AC220V 1000W 50N.M 135RPM
--GYJ80 AC220V 1000W 80N.M 90RPM
--GYJ70 AC220V 1500W 70N.M 135RPM
--GYJ100 AC220V 1500W 100N.M 90RPM
JIAXING IDER ELECTRONIC TECHNOLOGY CO., LTD.
Industry Gate Automation Access Systems Manufacturer
NO.87,SHUGUANG ROAD,TONGXIANG CITY.ZHEJIANG.P.R.CHINA
TEL: +86-573-88201279 FAX: +86-573-88899383
Wechat/skype/whatsapp/Mobile: +86-13957357034
Visit our URL learn more: http://www.doorlifter.com/
Please reply us to: gateopen@doorlifter.com