| Model: | GRIP-G |
|---|---|
| Brand: | GRIP |
| Origin: | Made In China |
| Category: | Construction & Decoration / Pipe, Tube & Parts / Pipe Fittings |
| Label: | pipe joint coupling , pipe connection , Pipe joint in ships |
| Price: |
US $27.5
/ pc
|
| Min. Order: | 10 pc |
| Last Online:25 Sep, 2020 |
GRIP-G
The safe and light weight pipe connection
“Pull-out” resistant pipe connections made from all stainless steel. The GRIP-G is the light range from GRIP. It is suitable for all applications in shipbuilding and offshore industries. The particular advantages of the GRIP-G are its low weight and its single-bolt systemfor the small-diameter couplings.
• For all marine pipe systems, essential and non essential, DNV/GL AND CCS tested
• Also reliably joins CuNiFe, duplex or titanium pipe materials
• Absorbs stresses in the pipe system and during operation
• Minimal bolt torque to optimise lifespan of seal
• Simple and fast assembly thus reduce installation time
• Separate independent anchoring and sealing mechanisms
Operating pressure in shipbuilding: 16 bar
Diameters: 26.9 to 406.4 mm
Temperature range: -20° C to 100° C
Order example: GRIP-G 76.1, EPDM
Our quality products – your benefit
The results of various endurance tests and inspections prove it and our customers’ satisfaction around the whole world reflects it every single day – GRIP pipe couplings can be trusted. They offer immense customer benefit, convince through practice-tested safety and consequent cost-effectiveness.
System independence: Connects the most varied pipe materials
Flexible pipe connection: Stress-free, compensates for tolerances
Easy assembly: Light, space-saving, no pipe-end preparation
Safe assembly without risk of fire or explosion: No protective measures required
Damping characteristics: Noise, vibration, movement
Economical: Cost-saving thanks to short assembly times
Progressive sealing effect
If the pressure in the pipe rises, the contact pressure on the sealing lips also
increases due to the flow through the pressure equalization channel.
Progressive anchoring effect
If the axial tensile load on the pipe rises due to increased internal pressure or
external influence, the teeth continuously penetrate deeper into the surface of
the pipe to compensate.
Component
|
Housing with bridge |
AISI304, AISI316L, AISI316TI |
|
Housing bridge |
AISI304, AISI316L, AISI316TI |
|
Anchoring ring |
AISI301 |
|
locking trunnions |
AISI304, AISI316L, AISI316TI |
|
Locking bolts |
AISI304, AISI316L, AISI316TI |
|
Washer |
AISI304, AISI316L, AISI316TI |
|
Sealing sleeve |
EPDM, NBR, MVQ, VITON |
Sealing sleeves: Areas of application & temperature resistance
|
Material of seal |
EPDM |
NBR |
|
Temperature range |
–30 oC up to +125 oC OD 26.9 up to 168,3 mm –20 oC up to +80 oC OD > 180 mm |
–20 oC up to +80 oC |
|
Media |
Drinking water Alcohols Compressed air |
Solids Water Oils Gases (combustible) Fuels Hydrocarbon solutions |
