Home > Products > Construction & Decoration > Pipe, Tube & Parts > Aluminum Tube & Pipe

Aluminum Spacer Bar Production Line is advanced technology, superior performance, and high cost performance, production speed more 120 M/Min. Aluminum spacer has been widely used in energy-saving window and door. Our chopped wave type high frequency power supply has advantage in energy-saving and reliability, some company has adopted it.

Process flow: Uncoiler – loading – forming – high frequency welding – scraper – sizing – straightening – flying saw – lay off table.

Composition of production line: Uncoiler, tube mill, solid state high frequency welder, straightening and shaping machine, flying saw.

High frequency welder use chopped wave type high frequency power supply, welding speed 100-120 M/Min.

The requirement of aluminum spacer:

Wall thickness: Wall thickness must between 0.2-0.35mm, the maximum deviation is±0.025mm.

Curvature: Spacer should no hard bending and side bending (beside bending radian of free droop).

Appearance: Surface is flat and smooth, no bump, pore uniformity and orderliness.

Automatic thermal break  aluminum  production machine
Heat insulation  aluminum  production machine
Thermal bridge aluminum  profile machine
Strip feeding machine for thermal barrier
Thermal break aluminum  windows
Assemble line for thermal break aluminum profiles.
Thermal break aluminum profile making machine
Thermal break assembly for  aluminum profiles
Thermal Insulation Strip Insertion Machine
Thermal break machine
Manufacturing of machines for thermal break profiles assembling
Strip Feeding Machine for Thermal Barrier Aluminum Profile
Barrier-strip Foam Technique
Film Wrapping Machine