Home > Products > Transportation > Vehicles > Automobile

Vehicle Specifications

Base vehicle:                           Toyota Land Cruiser 78-Series, 4WD, lhd, new

Engine model:                         4.2L In-line 6 diesel

Output:                                    96kW/135HP@3,800rpm, 285Nm/29.6mKg@2,200rpm

Cubic capacity:                        4,164 cc

Transmission:                          5-speed manual

Seats:                                       3+4 (4 foldable seats at the rear)

Colour:                                                White

Titled:                                      no

Body Type:                              3-door Station Wagon, three compartments layout

Grade:                                     STD

Interior Features:                

- Auto Air Conditioner and heater

- AM/FM Radio-cassette

- Fabric Seats

- 4-Spoke Steering Wheel

- Power Door Locking

Exterior Features:                 

- 16 Inch Steel Wheels

- Black Bumpers

- Halogen Headlamps

- Rear Door-Mounted Spare Wheel

Additional equipment included:

• ECM and battery protection
• Fuel-tank protection
• Upgraded suspension to cope with the additional weight due to armouring
• Run-flat systems on all 5 wheels

 Further optional equipment:

 Further optional equipment available at extra cost, such as 

• Operable front door windows
• Ballistic radiator protection
• Full engine sides protection
• Brake upgrade – stage 2 (slotted discs and braided hoses + HD callipers and pads)
• Brake upgrade – stage 3 (big discs, 6-piston callipers front, 4-piston callipers rear and pads)
• Suspension upgrade – stage 2 (HD antiroll bars)
• Suspension upgrade – stage 3 (high performance springs and dampers for high-speed driving)
• Heavy Duty 18” alloy rims with run-flats
• Gun-ports
• 2-way intercom
• Front and rear strobe-lights integrated in OEM light lenses
• Police siren/Public address system
• Bull-bar
• Communications equipment (VHF, UHF, satellite...)
• Electronic Counter Measure Equipment (RF Jammer)
• Video recording/surveillance equipment
• Higher ballistic protection level
• Additional blast protection – Protection against DM31 AP Landmines
• Other

Ballistic Specifications,

Harrow Security Vehicles in B6 level are armoured using materials, both opaque and transparent, that meet or exceed the requirements of the European CEN 1522/23 and CEN 1063 standards to the level FB6 for opaque areas and BR6 for transparent areas.

Armouring:

All four sides of the passenger compartment and the roof of the vehicle are protected using high-quality armour steel and glass defeating 7.62x51mm M80 Nato Ball ammunition (U.S. NIJ level III, CEN level BR6/FB6) and 5.56x45 SS109 ammunition (CEN level BR5/FB5 and BR6/FB6) at 0° incidence (90° to the surface) and 10m range according to CEN1063 and CEN1522.

Opaque Areas:

All opaque areas including the roof are protected against the following and all lesser weapons/ ammunitions at 90° impact angle in accordance with the above specifications.

• Calibre 7.62 x 39 mm, FJ/PB/FeC, AK 47 Kalashnikov
• Calibre 5.56 x 45 mm, FJ/PB/SCP, M16 Colt
• Calibre 7.62 x 51 mm, FJ/PB/SC, (FN) “FAL” / “LAR” NATO rifle

Transparent Areas:

All transparent areas are multi-layer and polycarbonate coated to protect against the following and all lesser weapons/ ammunitions at 90° impact angle in accordance with the above specifications. 

• Calibre 7.62 x 39 mm, FJ/PB/FeC, AK 47 Kalashnikov
• Calibre 5.56 x 45 mm, FJ/PB/SCP, M16 Colt
• Calibre 7.62 x 51 mm, FJ/PB/SC, (FN) “FAL” / “LAR” NATO rifle

Floor,

The floor of the vehicle is designed to defeat the following hand grenades 

• Two DM 51 (German Norm) detonated simultaneously

 In addition, the floor also offers protection against anti-personnel mines.

 Armouring design:

• The armouring is integrated inside the vehicle’s cab and forms a complete self-supporting structure so as to avoid excessive stress on the vehicle’s original structure.
• The interior armour-frame provides overlap for the large-surface armour components such as the door armour-plates and the windows.
• Hinge mounting points are reinforced both in the pillars and in the doors in a way that the armouring of the door is supported by the armouring of the pillar.
• Heavy-duty hinges with in-built door-stop.
• Fuel-tank(s) protected with steel armour-plates.
• The battery and control module of the engine are protected to the same level as the opaque areas.

Test Reports/ Product Liability,

All materials used in the production of the cabin were successfully tested against projectiles and explosives by independent laboratories. Test reports can be presented upon request or during a factory visit. The armouring of the vehicle provides protection against a wide range of projectiles and explosives. However, complete protection is not possible for reasons of design and modern military weapon technology.

Available upon request on new production order. Please let us know your specific requirements.

Please let me know if you have any requirement or order.

Best Regards,

John Jestin 

Sales

Harrow Security Vehicles LLC

Mobile: 00971556422875

Email: john@harrow-security.com