Home > Products > Chemicals > Plastic Materials

~PEEK+GF SHEETS/RODS（PEEK+GF30%）
COLOR：NATURAL, BLACK
SIZE：Sheet：T X WX L  6-100mm×620mm×1230mm
      ROD：Dia. X L   6-150mm×1000mm
DATA SHEET
ITEM  METHOD  UNIT  VALUE
Mechanical Properties
Specific gravity  ASTM D792  g/cm3  1.51
Tensile yield strength  ASTM D638  Mpa  180
Breaking elongation  ASTM D638  %  2.5
Bending strength  ASTM 790  Mpa  -
Flexural modulus  ASTM 790  Mpa  10000
Shore hardness  ASTM D2240  D  103
Impact strength  ASTM D256  J/M  60
Thermal Properties
Melting point  DSC  ℃  340
Heat distortion temperature  ASTM D648  ℃  315
Operating temperature(Long term)  -  ℃  250
Operating temperature (short term)  -  ℃  310
Thermal conductivity  DIN 52612-1  W/(K-M)  0.43
Coefficient of linear thermal expansion  ASTM D696  10-5-1/K  2
Electrical Properties
Dielectric strength  ASTM D150  KV-mm  24.5
Dielectric loss factor  ASTM D150  -  -
Volume resistivity  ASTM D257  Ω.cm  1015
Surface resistivity  ASTM D257  Ω  1016
Dielectric constant  ASTM D149  -  3.6
Chemical Properties
Water absorption  23℃ 60%RH  %  0.1
Acid resistance  23℃ 60%RH   +
Alkali resistance    +
Acid and alkali resistance    +
Resistance to sodium chlorate    +
Resistance to aromatic compounds    +
Resistance to ketone  23℃ 60%RH   +
Resistance to hot water  23℃ 60%RH   +
Others
Flammability  UL 94   V-0
Viscosity  -   +
Non toxic  EEC 90/128 FDA   0
Coefficient of friction  DIN 53375   
Anti-ultraviolet  -   
    
Remarks:
1.“+”: positive “-”: negative “0”: depends on condition.
2. All the parameters above are based on raw material but not finished products,

PEEK SHEETS/RODS（PEEK）
COLOR ：NATURAL、BLACK
SIZE：Sheet：T X WX L  6-100mm×620mm×1230mm
       ROD：Dia. X L   6-150mm×1000mm
DATA SHEET
ITEM  METHOD  UNIT  VALUE
Mechanical Properties
Specific gravity  ASTM D792  g/cm3  1.31
Tensile yield strength  ASTM D638  Mpa  95
Breaking elongation  ASTM D638  %  5
Bending strength  ASTM 790  Mpa  150
Flexural modulus  ASTM 790  Mpa  4100
Shore hardness  ASTM D2240  D  99
Impact strength  ASTM D256  J/M  165
Thermal Properties
Melting point  DSC  ℃  343
Heat distortion temperature  ASTM D648  ℃  152
Operating temperature(Long term)  -  ℃  250
Operating temperature (short term)  -  ℃  310
Thermal conductivity  DIN 52612-1  W/(K-M)  0.25
Coefficient of linear thermal expansion  ASTM D696  10-5-1/K  5
Electrical Properties
Dielectric strength  ASTM D150  KV-mm  24
Dielectric loss factor  ASTM D150  -  0.009
Volume resistivity  ASTM D257  Ω.cm  1015
Surface resistivity  ASTM D257  Ω  1016
Dielectric constant  ASTM D149  -  3.2
Chemical Properties
Water absorption  23℃ 60%RH  %  0.1
Acid resistance  23℃ 60%RH   +
Alkali resistance    +
Acid and alkali resistance    +
Resistance to sodium chlorate    +
Resistance to aromatic compounds    +
Resistance to ketone  23℃ 60%RH   +
Resistance to hot water  23℃ 60%RH   +
Others
Flammability  UL 94   V-0
Viscosity  -   +
Non toxic  EEC 90/128 FDA   0
Coefficient of friction  DIN 53375   
Anti-ultraviolet  -   
Remarks:
1.“+”: positive “-”: negative “0”: depends on condition.
2. All the parameters above are based on raw material but not finished products,