One, characteristic:
1, RF radio frequency wireless control, distance of up to 15M, easy to operate, easy to operate, wiring;
2, support for custom market common single or double line LED driver IC;
3, with 125 kinds of patterns, dazzling smart;
4, up to 2450 pixels;
5, power supply has anti - reverse function.
Two, remote control part
1, key functions:
ON/OFF
Control lamps and lanterns
NUM+
Increase the number of points per paragraph
MODE+
Forward selection pattern effect
NUM-
Reduce the number of points per paragraph
MODE-
Backward selection pattern effect
SEC+
Increasing the number of segments
SPEED+
Accelerate the effect of running speed
SEC-
Reduce the number of segments
SPEED-
Slowing down the effect of running speed
MATCH
Remote control and receiver pair
AUTO
All the tricks of the automatic cycle
2, lamp test function and matching:
Long press the Auto button for 5 seconds until the lamp extinguished, release the Auto button, jump to red, green, blue, yellow, purple, green, white colors jump effect, convenient lamp testing;
Long press 3-5 key MATCH seconds can be matched with the receiving controller, the other controller can not operate the receiving controller, repeat long press 3-5 key MATCH seconds can be bound with the receiver controller, the controller can accept other remote control commands. Default factory is a multi mode.
3, segmentation:
Some of the tricks are set to run, and the effect is the same for each section. If the overall movement of the effect section, the same can choose the number of segments, and points of each segment.
The number of segments are available: 5, 10, 15, 25, 20, 30, 35, 20, 30, 40, 60, 50, 70.
The total number of points for each segment of X
4, power down:
The controller will automatically save every time the user is automatically saved, power down, the next time the electric controller will run according to the original setting, to avoid the trouble to re set up after power.
Three, receiving part
Support for custom on the market common single or double line LED driver IC; users can be used to support the delivery of the IC, we set up after delivery, but also to modify the PCB board on the back of the R5, R6, R7, R8 four resistance of the short or open state to choose which kind of IC:s
Modify action
Support for IC
R5, R7, R6, R8, any resistance
WS2811
R5, R7, R8, R6
WS2801
R6, R7, R8, R6
LPD6803
R7, R7, R8, R6
LPD8806
R8, R6, R7, R5
UCS9812
R5, R6, R7, R8
APA104, UCS1903
R6, R7, R5, R8
APA102
R7, R8, R5, R6
TM1809, TM1804
This product can choose 5V power supply and 12V two kinds of power supply voltage.
Note: please make sure that the supply voltage before the power.
Four, application wiring diagram
Undefined
Wireless controller operating instructions SP101E
1 Features:
1 Remote control with, long distance wire, connection is simple and very easy to use RF;
2 almost every kind of one-wire or two-wire LED-DRIVER-IC Support; (be customized Can)
3 With 125 of patterns which, are vivid and beautiful kinds;
4 controller can control up to Each 2450 pixels;
Reverse connection of power supply. 5.Preventing
2 Control Remote
1 Of Each Button: Functions
ON/OFF
Or OFF ON
MODE+
Patterns forwardly Switching
MODE-
Patterns backwardly Switching
SPEED+
Speed forwardly Switching
SPEED-
Speed backwardly Switching
AUTO
Internal patterns automatically Run
NUM+
The number of pixels on each section Add
NUM-
The number of pixels on each section Decreased
SEC+
Number of section. Add
SEC-
Number of section. Decreased
MATCH
The Remote control with the receiving controller Match
2 and Matching: Testing
And hold the AUTO button for up to seconds 3 until LED is out release, the AUTO button to into the mode of switching in red cyan, green, blue, yellow, purple, and white witch, to test the your LED. Pressing
And hold the MATCH button for up to seconds 3 to match the Remote control the with receiving controller. Pressing and hold the MATCH button for up to seconds 3 to un-match. Pressing
3 Sections:
Of the patterns run in several sections each, section is the same. User can make the number of sections as 30,35. follow: Some 10, 15, 20, 25, Pixel number of each section can be chosen as follow: 20, 30, 40, 60, 70, 50
Of pixels Sections*Number = per section Sum
4 Setting Saving: User
S' each pressing on the button can be saved by the controller automatically. When the controller is power off next, time power up it, will work the way as the same as before. User
3 Controller Receiving:
Be customized to support almost every kind of one-wire or two-wire LED-DRIVER-IC.User can specify to support which IC before our delivery user, also and, can modify of status the R5, R6, R7, on the PCB to meet their needs: R8 Can
Actions
Support IC To
None of R5 R6, R7, R8, Short
WS2811
R5 breakR6, R7, R8, Short
WS2801
R6 breakR6, R7, R8, Short
LPD6803
R7 breakR6, R7, R8, Short
LPD8806
R8 breakR5, R6, R7, Short
UCS9812
R5 R6, breakR7, R8, Short
APA104, UCS1903
R6 R7, breakR5, R8, Short
APA102
R7 R8, breakR5, R6, Short
TM1809, TM1804
Receiver controller has two kinds of working voltage 5V-supply-voltage: and 12V-supply-voltage. The
Please make sure the power supply voltage is match to your controller before you power it. Cautions:
4 Connection Wire:
Undefin
