Home > Products > Industrial Supplies > Machine Hardware > Insulation

Silver rails on MG products;

MGN MGW Features:
MGN
◎ small size, light weight, especially for small devices.
◎ slider guide provides stainless steel and alloy steel two kinds. Stainless steel linear guide, contains the slider, guide and other metal parts, such as ball retainer, etc., are the use of stainless steel, with rust properties.
◎ The Gothic type four-point contact design, can withstand loads in all directions, with strong rigidity, high precision characteristics.
◎ have ball retainer design, with the permission of interchangeability in precision.
MGW (wide)
Design ◎ widened rail, significantly increasing the torque load capacity, can uniaxial use.
◎ Gothic type four-point contact design, can withstand the load in all directions and has high rigidity characteristics.
◎ slider equipped with micro holding the wire, remove the ball will not fall off the slider.
◎ rails, sliders, and all metal parts are used not _ steel, with anti-corrosion properties.

◎ Application:
◎ semiconductor manufacturing equipment
◎ printed circuit board IC assembly equipment
◎ Medical Equipment
◎ robotic arm
◎ precision measuring instruments
◎ office automation equipment
◎ other small linear slide device

Silver rails on the advantages:

◎ high positioning accuracy
  When using the linear guide as a linear guide, linear guide way due to the friction of rolling friction, not only sliding friction coefficient down to 1/50 of the guide, dynamic friction and static friction gap also become small. So when the bed running time, there will be no slip phenomenon can be achieved by positioning accuracy μm level.

◎ less abrasion can maintain precision long time

  Conventional sliding guide, inevitably due to the adverse effect of greasy countercurrent motion platform accuracy, and because of inadequate lubrication during exercise, leading to wear contact surface running track, seriously affecting the accuracy.
The scrolling guide wear is very small, so the machine can maintain precision long time.

◎ for high-speed motion and significantly reduce the required drive horsepower machines

  Since the linear guide moves friction is very small, only a small force will make the bed running, especially in the work of the regular round-trip BED runtime, more significantly reduce the amount of power consumption machine.
And the heat generated by friction because of its small, suitable for high-speed operation.

◎ can withstand the load up and down direction

  Due to special beam linear guide system design, which can withstand the load up and down direction, unlike the sliding guide in a direction parallel to the contact surface can withstand lateral load is light, easy to cause bad machine running accuracy.

◎ easy to assemble and interchangeability
  Linear guide interchangeable, respectively replace the slider or even a linear guide rail group, high-precision machine can regain guide.

◎ Lubrication simple structure

If insufficient lubrication slide guide, will result in direct contact with the metal surface friction loss bed units, while the sliding guide to adequate lubrication is not easy, you need the proper position BED oil drilling. Linear guide devices already on the slider nozzle directly to the grease gun into the grease, also put special oil pipe joints connecting tubing to automatic fueling machine lubrication.