Home > Products > Industrial Supplies > Machinery > Welding Machinery

Silver rails QH series
(1) low-noise design using synchronous coupling can hit each ball metal sound disappeared arranged evenly spaced, the ball and the ball between the sharp high-frequency sound intensity effectively reduced. The sum of the noise level and the old series is more effective to reduce the speed of approximately 7.7 db in each domain.

(2) self-lubricating design patents do not add fuel to the synchronization connector on the design of the intermediate interval reservoir space and can supply ball at runtime needs lubrication, and the direction of rotation when passing unit, lubricant can be uniformly add to the reservoir space, continue evenly lubricate ball, so the frequency of supplemental lubricant can effectively be reduced. After testing at the factory to add high-performance lithium soap grease, at 0.2 times the dynamic load rating, the sustainable use of more than 2500 kilometers without fatigue damage. So at the factory to add high-performance grease, under normal use without maintenance, to ensure its longevity life.

(3) to enhance the smooth movement of the conventional non-synchronous linear guide of the coupling device, starts running, ball load side will first movement, and then push the rotary portion of the ball direction within the no-load side, causing the collision chain back and forth, so that friction changes in resistance dramatic ups and downs. The use of Q1 Type SynchMotion TM technology with synchronous linear guide due to the coupler, all the ball within the same cycle of the series together, so when the slider starts moving, all the ball almost simultaneously started, and there is no back and forth between the steel ball collision, while maintaining a certain inertia, the fluctuation range can effectively reduce the frictional resistance.

(4) high-speed synchronous design spacing unit coupling design allows friction between the ball and the ball disappeared, and the patented design allows HIWIN ball and synchronous coupling between an annular line contact, can reduce the contact area between the two , thus effectively reducing the frictional resistance, so SynchMotion TM silent type linear guide with excellent high-speed performance.

Application
For high-speed, silent and low dust needs of the electronics industry.

Silver rails on the advantages:
◎ high positioning accuracy
  When using the linear guide as a linear guide, linear guide way due to the friction of rolling friction, not only sliding friction coefficient down to 1/50 of the guide, dynamic friction and static friction gap also become small. So when the bed running time, there will be no slip phenomenon can be achieved by positioning accuracy μm level.

◎ less abrasion can maintain precision long time

  Conventional sliding guide, inevitably due to the adverse effect of greasy countercurrent motion platform accuracy, and because of inadequate lubrication during exercise, leading to wear contact surface running track, seriously affecting the accuracy.
The scrolling guide wear is very small, so the machine can maintain precision long time.

◎ for high-speed motion and significantly reduce the required drive horsepower machines

  Since the linear guide moves friction is very small, only a small force will make the bed running, especially in the work of the regular round-trip BED runtime, more significantly reduce the amount of power consumption machine.
And the heat generated by friction because of its small, suitable for high-speed operation.

◎ can withstand the load up and down direction

  Due to special beam linear guide system design, which can withstand the load up and down direction, unlike the sliding guide in a direction parallel to the contact surface can withstand lateral load is light, easy to cause bad machine running accuracy.

◎ easy to assemble and interchangeability
  Linear guide interchangeable, respectively replace the slider or even a linear guide rail group, high-precision machine can regain guide.

◎ Lubrication simple structure

If insufficient lubrication slide guide, will result in direct contact with the metal surface friction loss bed units, while the sliding guide to adequate lubrication is not easy, you need the proper position BED oil drilling. Linear guide devices already on the slider nozzle directly to the grease gun into the grease, also put special oil pipe joints connecting tubing to automatic fueling machine lubrication.