Directions for Anti-static Kit
Product Description
Basic Features
HWH-3200 Anti-static Kit amid Work-mat(+100-648) made with red soft leather of PVC, good flexility, resist burn and endure attrition; Due to append particular anti-static substance make with permanent static dissipative finished product,nothing to change performance of anti-static vary with the environment and the times.
Open it will be make a static dissipative work field, it would be temporal a local performance of static.
Function Features
1、Nothing S、NH+3、Hg、Pb etc any injurant in the material,it can be not harm to anybody.
2、To make use of assembly for varied tools, while the operator to use tool to provide route of static dissipative.
3、Outfit assembly of grounding: one aspect fit on the wrist strap, and one end grounding to dissipative static to mother earth, so that to dispel static of body, to safeguard safety for electron products and organ.
4、You can may be impress a surface with your need Logo or another mark
5、It is lustration, may be clean. It use knitting to sew up the fringe.
Using Area
When in not suitable to set up special ESD protection workaround and workbench district that it must be to operate for anti-static, it can be provide effective protection instrument. If so assist operator with progress field-work andservicing etc dealing in not specified safety products of ESD.To operate any product before, youmust be to turn off the power.
Technical parameter
ItemTest methodTest valueObey standardStandard value
Surface resistanceSJ/T 10694-1996107ΩGJB3007-1997106-109Ω
Volume resistanceSJ/T 10694-1996107ΩGJB3007-1997106-109Ω
Friction voltage10694-19960 VGJB3007-1997<100V
Specification & product pictorial drawing
Specification of work-mat: 610*550*7.7mm
Couple products: (1) work-mat(+100-648)
(2)Kits ground wire(+100-649)
(3) snap fastener anti-static wrist strap (HWH-818)
Using method
1、Would be not to pucker the work –mat put it anear the table of workaround or floor board, to take out the ground wire and the snap fastener anti-static wrist strap from Kit.
2、One midst of kit ground wire to connect on the connection mast of workaround, one end the alligator clip of ground wire anear connect that need to replace or move metal surface of product, but the surface must be include a part of product-cell; another ground wire connect on the snap fastener anti-static wrist strap, also to adjust the snap fastener strap to connect bared skin.
3、Begin to work.
4、All the process wind up, to dismantle locales safety tools to pucker package renewedly.
Shipment package data
Package material :paper-box
quality of Package material :A=B
out side of Package material :285*215*140
Amount:1pcs
Package products amount:10sets
Product Image
Img 1
Send Inquiry to this Member
Related Products of this Company
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,