Home > Products > Electronics & Electricity > Battery, Storage Battery & Charger

Scope of application: the 10.8V/11.1V/12V/12.6V voltage of the lithium battery refers to the same kind of battery,
10.8V/11.1V/12V is the charge before the voltage,
12.6V is a full charge of the voltage,
The parameters of the battery are consistent,
So charge voltage
3.6V (3.6V*3 Series) lithium battery pack
3.7V (3.7V*3 Series) lithium battery pack
4V (4V*3 Series) lithium battery pack
4.2V (4.2V*3 Series) lithium battery pack
Suitable for cylindrical lithium battery pack; polymer lithium battery pack; square lithium battery pack
Lithium iron phosphate battery charging
Function: constant current and constant voltage intelligent, there are over voltage / over current / over temperature / over charge protection, charging indicator light, red light charging, green is full.
Professional technical parameters (specifically designed according to customer requirements - voltage / capacity / size / line)
- 105 for output capacitor
- Global AC input voltage
- high efficiency, low working temperature
- soft start current, effectively reduce the impact of AC input
- short circuit protection, over load protection
- small size, light weight
- 100% full load test
- inside the EMI filter, ripple minimum
- Performance: with constant pressure, constant current, over voltage, over current protection function, indicator light conversion, automatic recovery, etc.
- charge voltage: 12.6V (+ 0.05V); the indicator light is bright green when empty.
- charging voltage range: constant current phase voltage random, but not higher than 12.6V (+ 0.05V), indicating the red light
- output current: 1.3A (+ 5%); when the constant voltage charge, the current is gradually reduced.
- convert current: 0.1C-0.15C; full conversion, indicator light green
- ripple and noise (Note 3): <250mVp-p (constant pressure)
- line adjustment rate (Note 4): 0.5%
- DC output power: Max 24W
- efficiency: >85% (maximum output voltage, full load)
- DC voltage range: 12.6V (+ 0.05V)
- input voltage range: 100 ~ 240VAC, 47 ~ 63Hz, 140-350VDC
- input current: 0.03A/230V
- shock current: cold starting current 2A/230V
- leakage current: 3.5mA
- overload protection: 105% to 150% types: FOLDBACK current limiting output reset: automatic recovery
- temperature coefficient: 0.03% (0 ~ 50) OUTPUT
- start up, rise, and hold time: 200ms, 50ms, 30ms
- seismic performance: 10 ~ 2G, 10min./1 500Hz cycle, when the length of 60 points, each axis
- voltage resistance: input - output: 1.5KVAC
- isolation resistance: input and output: Ohms 10M
- working temperature, humidity: 90%RH, +50, 20% ~'-10
- storage temperature, temperature: 90%RH, +60, 20% ~'-10
- Dimensions: 110*65*45
Output interface: 5.5*2.1 can be customized according to customer demand