Product Description
EPS decorative line is a new type of exterior wall decoration line and components, more suitable for installation
, EPS, XPS insulation wall, can reflect the European classical, elegant decorative style, the installation of cement components is very difficult, long time, long time will appear cracks, durability, and the use of EPS decorative lines, with easy installation, economy, durability, long, etc.. With the continuous development of building decoration industry, more and more new materials continue to take off, EPS lines are more and more people favor of the object, there are more and more companies go into the EPS line, some of which Professional Company stand out. For example Shanghai Teng enterprises building materials Co., ltd.. Is not affected by temperature changes, cold, heat, moisture, moisture, and the impact of acid rain. EPS decorative lines can fire and will not emit toxic substances, is a high quality decorative building materials. EPS decorative lines using computer numerical control cutting, fast production, types, such as lines, Roman column, the window is covered, brackets, such can installation in the sides of the window, door, eaves and wall body; the facade of the building is more beautiful, for building designers bring new and different kind of creativity.
Folding editor this paragraph applies to occasions
EPS lines of European style architectural style villa, the platoon, high-rise and other buildings
EPS line company developed the main products EPS light body component is the future leading exterior wall decoration of new green building materials, EPS line is a new type of exterior wall decoration lines and components, it can completely replace the traditional GRC cement components, more suitable for the installation of EPS, XPS insulation wall, which can reflect the European style, classical, elegant decoration style, installation of cement components is very difficult, time and long, and time will appear cracks, durability, and so on.
The function and characteristics of the folding editor
EPS lines with the traditional plaster line and the advantages of GRC cement lines contrast:
EPS decorative lines in China in recent years, a new building decoration materials, its emergence in the domestic design industry has caused a huge response, and quickly got the recognition and adoption of many domestic designers. Its appearance completely subvert the wall decoration lines can only use GRC and plaster of the tradition, in the construction industry has been widely appreciated. Compared with the traditional GRC and EPS, the advantages of the new type of decorative lines are:
(1) the light quality, EPS [2] aggregate moldings for polystyrene, the weight of finished product is about about 1 / 6 of the GRC decorative line, one can freely move construction. And the fire, waterproof, mothproof, anti mildew, anti cracking. Construction is convenient and simple, suitable for all kinds of indoor and outdoor decorative materials, is a new type of green decorative materials.
(2) the main products have carved, Chuangtao line, waistline, Mentao line, eaves line, corbel, Roman column, door trim, decorative elements such as product, and can accept customized drawings.
(3) paste firmly. The EPS decorative line is bonded with polymer mortar and wall and polymer mortar is will organic glue is applied to the inorganic cement mortar stirring made use of long life, firm adhesion, and has national standards and norms and in a large number of engineering application prove is safe and reliable, so as to avoid because of the hidden dangers of anchor bolt fixed construction and anchor bolt corrosion, but also solve the external wall insulation of cold and hot bridge problem.
(4) the installation is simple, the use of special bonding materials and methods, a person can be installed in the construction, especially the large amount of line engineering, only need to install. The pattern effect is clear and natural, elegant and luxurious.
(4) there is no gap between the lines. EPS decorative lines between the use of the same wall and the same gap filling material, the gap is all gone, in the use of the future will not appear cracks.
(6) environmental protection: using polyester as raw material, non-toxic and harmless to the National Engineering decoration standards for green products.
The main technical parameters of the folding editor
EPS polystyrene board (not less than 18kg/m class B1 fire fand,)
Alkali resistant glass fiber mesh cloth (not less than 80 g / M)
The impact strength is more than 3J;
Anti wind pressure and wind load >12.OKpa;
The vertical tensile strength more than 0.1Mpa;
The water absorption rate of less than 500g/ square meters
Folding editor this paragraph product type
Hung out EPS line
Hung out EPS line
The main products are carved, Chuangtao line, waistline, Mentao line, eaves line, corbel, Roman column, door trim, decorative elements such as product, and can accept customized drawings.
Folding edit this section quality inspection control
(1) the product of the system is provided with a measurement report issued by the inspection department and is accompanied by a certificate of conformity.
(2), 7.0.7 (external insulation engineering and technical specification for external insulation engineering), which is implemented in accordance with the national industry standard JGJI44-2004 (external wall insulation engineering technical specification) shall be put into use in the project.
(3) the system shall be carried out before the quality acceptance of the external wall of the basic level, and the construction conditions shall be in conformity with the requirements of the.
(4), lines should be firmly with the adhesive base, not loose and hollowing, polystyrene board and wall at the grassroots level to the bonded area shall not be less than 40% of the area of polystyrene board.
(5), and the adhesive mortar should be configured using mechanical stirring, more than the operating time of materials shall not be used.
(6), mesh cloth should press tightly, no hollowing, wrinkles, warping, exposure and turn package and lap length should be in conformity with the relevant provisions.
(7), mortar and EPS lines should be bonded firmly, no delamination and no exposure to dust and hollowing, cracks and other defects.
Construction procedure
Folding editor this section of operation procedures
Surface treatment -- elastic line - Binder - installation line locating fixed anchor nail - Joint - finishing - Acceptance
1, the scene investigation
Firstly, the construction site survey, inspection base, base
